New User - Help Required Sourcing Mini Trunking End/Stop Cap

[JagSingh]

Hi All Members

1st Post as a new member.

Can anyone Please advise where I can source a 16x25 end/stop cap as shown in photographs

Kind Regards.
Jag.

 

[davesparks]

That's probably not an end cap, it's likely an external bend with a bit cut off

 

[Pete999]

What size, there must be identification on the trunking if was fitted to

 

[telectrix]

 

[JagSingh]

Hi All

Thanks for you replies, I can confirm it is a single fitting with NO alterations.

The end cap slides over the trunking. There is no marking on the trunking itself.

It was fitted by a Contractor working for PHS Group.



Kind Regards.
Jag.

 

[telectrix]

why not just cut a bit of trunking lid to suit and glue over the butchered end that you have?

 

[Dave OCD]

Hi All

Thanks for you replies, I can confirm it is a single fitting with NO alterations.

The end cap slides over the trunking. There is no marking on the trunking itself.

It was fitted by a Contractor working for PHS Group.



Kind Regards.
Jag.

I'd disagree, it's had a little slot nibbled out of it, probably for a phone or alarm cable to escape from.

 

[JagSingh]

Hi All.

This end/stop was used on 16x25 mini trunking when a contractor installed a hand dryer. The little slot nibbled out was the outlet for 1mm 3 core flex.

 

[telectrix]

and whoever did it didn't know what a rat-tail file was for.

 

[Pete999]

I'd disagree, it's had a little slot nibbled out of it, probably for a phone or alarm cable to escape from.

Have a look at the Marshal Tufflex web page

 

[Dave OCD]

Why Pete ?

 

[westward10]

Nasty job doesn't offer suitable cable restraint. Fit an outlet plate.

 

[suffolkspark]

screwfix, they sell tower ones in packs of 2 for cheeeeeeeeeeeeeeeep

 

[Pete999]

Why Pete ?

Oh I dunno thought maybe it was MT trunking and if it was he might be able to identify what he wants. Or he could take a trip to B&Q, Homebase. Wickes, Maplins, CEF, Eddies and look for himself, or Screwfix or Toolstation. Do you have any bright ideas that could help him? I just though that was a good idea, because I can't identify trunking by just looking at it unlike some,

 

[onions1066]

That is an mk external angle with a piece cut off 100% because we do it that way everyday.

 

[westward10]

Ditch it and do a proper job.

 

[onions1066]

 

[onions1066]

Ditch it and do a proper job.

Proper job? What is wrong with that?

 

[Dave OCD]

Oh I dunno thought maybe it was MT trunking and if it was he might be able to identify what he wants. Or he could take a trip to B&Q, Homebase. Wickes, Maplins, CEF, Eddies and look for himself, or Screwfix or Toolstation. Do you have any bright ideas that could help him? I just though that was a good idea, because I can't identify trunking by just looking at it unlike some,

Pete, no need to justify yourself to me, I think you quoted my post by mistake ?

 

[Pete999]

Pete, no need to justify yourself to me, I think you quoted my post by mistake ?

You asked me why Dave, or have I got it wrong?