Discuss Noise using a dimmer in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
0
Hi
Just had a text message from a friend asking for some help, so thought you guys might be able to help.

He has 5 x 12v downlighters in his sitting room, all working fine but he wanted a dimmer switch, so he fitted a 2 gang 400w switch, now he tells me the max on the switch is 315w on one side but when he turns it on he gets a buzzing noise , not from the switch but from the cu, with a normal switch all is fine and no noise.

The dimmer work fine and the lights dim its just the noise he is worried about.

So is there something worng withthe switch or does he need to get a different switch??

Many thanks,

Lyngarth
 
look up member sparkycpu hes done a post before about this which explains the issue as hes only done a few posts you should find it quickly
 
Hi
did a search but could not find a member withthat name?? or I'm not doing the search right !!

Many thanks

Lyngarth
 
type in the search box 'Loud buzzing noise' then go down the list and clickon mcb loud buzzing noise when it opens hes on page 2 one of the last posts, let us know if you find it and if it helps
 
Many thanks for that, not sure what I was doing, but have now got the info.

I will let him know and will let you know how he gets on.

Many thanks for the help,

Lyngarth
 
• This is common in modern but cheaply built dimmer switches. Since the Rheostat has been decommissioned in favor of a TRIAC circuit (variable transistor), the input voltage isn't wasted. Rather the TRAIC circuit turns the AC current flowing to the bulb on and off about 120 times per second. This "chopping" up of the voltage can result in a buzzing sound. A higher end dimmer switch will have both an inductor choke (a length of iron core wrapped in wire) and an interference capacitor. These two components store electricity to help smooth out the sharp voltage jumps caused by the TRIAC circuit.
 
Hi.
One thing i did notice from OP is that the dimmer is rated @ 400 Watts .When dimming LV transformed lumminaires the dimmer should have a VA rating and then be de-rated by 15-20% for transformer loses.Also check transformers against the dimmer to see if they are "Leading Edge or Trailing Edge" as they must be the same type.
 
It seems that a lot of these problems are down to people not realising that the current is out of phase with the voltage because of the transformers and just doing true power / voltage calculations instead of apparent power/voltage. As a result they don't realise that mcbs, switches are stressed because the power factor means that the apparent power is greater than they realise.
 

Reply to Noise using a dimmer in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock