Ola. I/R tests on lights

[Speedy]

When doing an Electrical Condition report what's the best way to do a live to neutral I/R test on a lighting circuit with LED's (600x600) or infact any lights in a large office?

 

[cliffed]

Live joined with neutral,then test to earth

 

[KEV 1 N]

LIM

 

[Zdb]

Easy, just disconnect every single light

 

[PEG]

Hi,you are not easily going to achieve a line/neutral IR test,without being able to separate those conductors,first,ie;remove all connected loads. This may include suppression or voltage limiting equipment,within connected fittings.

You can,however,IR test to earth, on both conductors together,by joining them.

Or,you could LIM it all...and just go for a coffee...

 

[Deleted member 26818]

Are these lights connected to a LCM?