Online 2391 exam and a little help to get pass

[Mike88B]

Hi
I just had a 2391-52 exam which I couldn’t pass,I failed with 68%.
Can anyone recommend some online questions simulator for this exam?Which to be close enough for the real one?
Thanks

 

[SparkyChick]

Given the subject of 2391 is inspection and testing I would suggest you revise Guidance Note 3 extensively to the point where for the most part you don't have to refer to it, and get lots of practical experience in inspection and testing (if you don't already have it).

 

[Mike88B]

Thanks

 

[H]

I sat and passed the course very recently, are you currently doing the course?

SparkyChicks advice is golden, read and digest GN3. Some other sites with some revision material are '-----------', also I think there is some stuff on 'swindonmassive' I found with the online exam probably the trickiest of all four parts of needed to pass. Purely down to how the questions were worded and some of the answers being very very similar to one another.

 

[Mike88B]

Hi
Yes I did the course now few weeks time and it’s just bad to see how the questions are ,i try to get again the GN3 and make more revises

 

[telectrix]

ask loki. he's just passed his and got an extinction.

 

[Diver233]

https://electacourse.com

They do some online tests

 

[cliffed]

Did mind in 1998,that was the hardest course I ever did,good luck,they’ve made it a lot easier now.

 

[Loki]

ask loki. he's just passed his and got an extinction.

I did the c&g 2392-10 first before doing the c&g 2391-52
The reasoning behind that was the 2392-10 teaches you how to test & use the testers etc & the 2391 doesn't teach any practicals as they expect you to know already.
Thought I'd have a better chance of passing doing the 2392-10 & the regs course first.