Opinions Wanted

[tsu11]

Hi All, Really keen to hear what people opinions are on this installation completed by a contractor last week.

 

[tazz]

Can I ask Why...?

 

[tsu11]

Was installed on site by a sub contractor who claims there is nothing wrong with the install, but another electrical contractor on site is claiming its a terrible install. Just wanted a few opinions to see if its just --- for tat or if i need to get the works checked.

 

[davesparks]

Basic insulation visible outside of an enclosure will be a good start.

 

[Flanders]

It is poor you should not be able to see the brown and blue iner cores

 

[tazz]

Not the neatest, but no bare conductors exposed

 

[Leesparkykent]

no excuse for poor workmanship like this, if some one who worked for me done this they wouldn't last very long!

 

[tsu11]

Hi guys, thanks for the opinions so far. Having worked with fire & security for the last 10 years its been very rare that ive got involved with the above types of works. We have just taken management of a site and I keep finding works like the 1 pictured. I then get told by other contractors its not right and when I call the installer back to site they claim there is nothing wrong with it and that its compliant. Are those wire compliant?

 

[Leesparkykent]

can you see exposed terminals underneath where the outer insulation doesn't but up to bottom of the terminals?

 

[tsu11]

Yes a very small amount of copper exposure. One of my points was if someone (stupidly) put there finger up the enclosure they would be touching live!

 

[Leesparkykent]

Yes a very small amount of copper exposure. One of my points was if someone (stupidly) put there finger up the enclosure they would be touching live!

then it doesn't comply and the installer should be made to come back and rectify his shoddy work.

 

[davesparks]

The sheath should be continuous right up to the meter, it clearly isn't.

What you have there is no different to a T&E with the outer sheath removed a few inches before it enters a Pattress.

 

[tsu11]

The sheath should be continuous right up to the meter, it clearly isn't.

What you have there is no different to a T&E with the outer sheath removed a few inches before it enters a Pattress.

Thanks for this, dont suppose you know where or have link to somewhere that has this as written fact?

 

[telectrix]

and the supplier won't be happy with the missing meter seal, either. if you can actually see the terminals, hit him with exposed/accessible live parts.

 

[Pete999]

Outer sheath stripped back to far?

 

[Pete999]

Outer sheath stripped back to far exposing inner insulation
Sorry about the double post don't know want went wrong

 

[telectrix]

morning, pete. wet the bed again? lol.

 

[Pete999]

morning, pete. wet the bed again? lol.

Mornin Tel
No mate haven't had me medication yet, couple that with a bit to much ale last night you get the picture?

 

[Engineer54]

It's rough, but i wouldn't be loosing any sleep over it, Hell i've seen far worse than that over the years....

 

[stevethesparks]

Post 10 says it all, have you an image looking up into the terminations?