Discuss Part P assessment question in the UK Electrical Forum area at ElectriciansForums.net

On a 30ma RCD ? :)
Hi Dave - the fault I'm thinking of is loss of N on the DNO side of the cut out. So with TNCS the local N and E are still connected, but floating now. Initially the kettle will not carry any current, as N is dis. But when it's earthed metal casing is touched by me, I provide a path for current flow. This current travels via L and N and the element (so the RCD is still happy) and back to cutout, onto installation E and circuit cpc back to the kettle and me ... Ugh.
 
Hi Dave - the fault I'm thinking of is loss of N on the DNO side of the cut out. So with TNCS the local N and E are still connected, but floating now. Initially the kettle will not carry any current, as N is dis. But when it's earthed metal casing is touched by me, I provide a path for current flow. This current travels via L and N and the element (so the RCD is still happy) and back to cutout, onto installation E and circuit cpc back to the kettle and me ... Ugh.
If there is bonding in place to metallic services (not plastic) current will still flow through the kettle.
Reason for the proposed requirement for consumer earth electrodes, is because of the increase in plastic services.
 
If there is bonding in place to metallic services (not plastic) current will still flow through the kettle.
Reason for the proposed requirement for consumer earth electrodes, is because of the increase in plastic services.
Is it?
Not because of open circuit PEN conductors?
 
Of course it’s because of open PEN conductors.
Not been a real problem though because of bonding and metallic services.
Now though, as more and more of our services are plastic, bonding is pretty much pointless.
 

Reply to Part P assessment question in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

As the title says, I am looking for a recommendation for an enclosure and gland arrangement to electrically isolate or divorce the earth/armouring...
Replies
25
Views
4K
Hi all, I have my NIC assessment on Tuesday and only job I've been able to get access to so far is a board change I've done recently as NIC only...
Replies
8
Views
1K
Hello all, First of all I apologise if this is in the wrong forum, I figured the general forum may be the best bet :) Thank you for taking...
Replies
3
Views
463
Hi all, For clarity, I'm not a qualified electrician, but have a reasonable amount of experience as I've done plenty of wiring (signed off by a...
Replies
19
Views
3K
Hi all, New to the forum! Quick background on me: I have a degree in electrical engineering and spent many years working with qualified...
Replies
76
Views
7K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock