Pictures of Board work

[casperLennon]

It was fully tested tested and inspected by his brother so all good. I might just do it one day

 

[Joshua]

I wish you'd all just post pictures of your boards

Yes, I know my earth sleeving is bigger than yours, size doesn't matter, it's how you use it.

(And I know there's no main switch in the board, everything is being fed from the communal riser.)

 

[davesparks]

(And I know there's no main switch in the board, everything is being fed from the communal riser.)

That RCD looks a lot like it will fulfill the function of a main switch to me.

 

[Joshua]

That RCD looks a lot like it will fulfill the function of a main switch to me.

Very true, I just didn't want anyone thinking I'd forgot to put in a proper main switch.

I'll try put another pic up tomorrow. I've been on fuseboards all week doing 2 a day. . I'm stripping cables in my sleep at this point

 

[casperLennon]

very neat and tidy

 

[Squid]

I wish you'd all just post pictures of your boards

Yes, I know my earth sleeving is bigger than yours, size doesn't matter, it's how you use it.

(And I know there's no main switch in the board, everything is being fed from the communal riser.)

View attachment 37324

Is the main earth cable the correct size?

 

[Squid]

What does that mean swd? I hope your not into something weird and perverse

It means either having your nuts smothered in swarfega and tied to a heating pipe in a basement for the stockroom girls to "rescue" you or being stripped naked and gaffer taped to a chair and sent down in the lift to the admin office "ladies" take your pick.

At least after that your "cables" would have been straightened out

 

[Joshua]

Is the main earth cable the correct size?

Of course
The 4mm in the RCD is terminated back in the main riser with the main isolation switch and incoming earth.

 

[Squid]

Of course
The 4mm in the RCD is terminated back in the main riser with the main isolation switch and incoming earth.

Just keeping you on your toes, the screws are not in alignment though........

 

[Joshua]

Just keeping you on your toes, the screws are not in alignment though........

Ok my next board will be perfect

(If I keep saying this then it'll eventually be true)

 

[KennyKen]

63mm Putty Gland for this morning... another 4 to go!!!

 

[Joshua]

63mm Putty Gland for this morning... another 4 to go!!!

View attachment 37330

 

[Specialist]

What does that mean swd? I hope your not into something weird and perverse

Read more from swd, you'll start to understand his sense of humour ! I think

 

[Specialist]

63mm Putty Gland for this morning... another 4 to go!!!

View attachment 37330

Nice job buddy, go easy on the polish next time though. The glare hurt my old eyes

 

[Deleted member 9648]

What a crock of sheet posted by the OP.....if you are going to criticize someone elses work then make sure yours is perfect. And it isn't. Neithers mine. But it's good enough.

 

[Pete999]

 

[Squid]

pfffft,

 

[Specialist]

pfffft,

View attachment 37336

SWD you've really got to learn to be neater in your work, that tape is bloody messy

 

[Pete999]

I wish you'd all just post pictures of your boards

Yes, I know my earth sleeving is bigger than yours, size doesn't matter, it's how you use it.

(And I know there's no main switch in the board, everything is being fed from the communal riser.)

View attachment 37324

Nice sized Pclips

 

[Squid]

SWD you've really got to learn to be neater in your work, that tape is bloody messy

I can take criticism from you but not from some youngster........