Posting a message to the forum will remove the above advertisement

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss Question 2 on Design Project in the Electrical Courses & Electrical NVQ's area at ElectrciansForums.co.uk.

Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    Hello,

    I am just starting my project. I have uploaded the questions.

    Questions 2B & C

    • Socket for the kettle - each of the tables.
    • Socket for TV - next to the Kettle, as I assume it's not wall mounted.
    • Two single sockets for Laptop/phone to each side of the bed
    • FCU - by the main entrance to the room.
    • FCU for hand towel - outside of the bathroom.
    • Bedroom lighting - next to the main door
    • Bathroom lighting - the outside door of the bathroom
    Questions 2d&e

    I was thinking each room should have its own CCU.

    Questions 2f, g & h

    Pool lighting - I have gone for led spotlights from H2 PRO 550 - Collingwood Lighting - https://www.collingwoodlighting.com/index.php/en/products/downlights-halers-range/item/new-h2-pro-550-uk
    Cafe/Dining - Pendant: Clifton Pendant - https://www.mullanlighting.com/en/clifton-pendant
    Kitchen Area - LED Panel. I did think of track lighting, but I think they would be a lot more expensive, harder to clean.

    But if anyone has any advice that would be great.
     

    Attached Files:

  2. Loki
    Offline

    Loki Trainee Access

    Location:
    Devon
  3. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    Thanks I will have a look at the post. I will have a read of the spec again. But I don’t think it mentioned a concrete ceiling. As the only other way I thought was to have wall mounted lights with some around the pool.
     
  4. yasir
    Offline

    yasir New EF Member

    Location:
    London
    Hi
    Can anyone help me with Q2
    Cafe pool assignment please
    Thanks
     
  5. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    Managed to do Q2 and the tutor is happy with it. I’m now on Q3, so I’m just looking at that now. Seems okay.
     
  6. yasir
    Offline

    yasir New EF Member

    Location:
    London
    Hi can u help me Q2 please. How did u draw it. Thanks. If possible can I hv the pictures for my guidance
     
  7. darkwood
    Offline

    darkwood Super Moderator Staff Member Moderator

    Location:
    West Yorkshire
    Please do not ask members to forward project work they have done, the forum is happy to help but you need to explain what part of Q2 you are struggling with and members can then guide you, we don't allow members to pass on exam answers or project work otherwise that defeats the whole point of your tutor setting you these tasks to see if you understand how to do it.

    Could we also ask you set up your own thread for this question as you are hijacking someone else's thread here which can lead to multiple conversations and confusion.
     
    • Like Like x 1
  8. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    I’ve had a look at Q2 again and I changed my Lights for the Pool to High Bay LED Phillips Lights that you can walk mount. As the ceiling is concrete.

    But looking at Q4 where you have to do some calculations, it mentions the pool supply as if you have to calculate the pool, sauna, plunge room, and changing rooms. But I’m not sure as I don’t have the full spec to hand whether you can have a number of different lights for the pool and then all the other rooms.
     
  9. Strima
    Offline

    Strima Electrician's Arms

    Location:
    St Neots
    State on your answer you have made some logical assumptions. as long as your reasoning and calculations are sound you will satisfy the question.
     
    • Like Like x 1
  10. Loki
    Offline

    Loki Trainee Access

    Location:
    Devon
    We were told supplies were:

    32A for pool & pump equipment (3 phase)
    16A for hand dryers
     
    • Like Like x 1
  11. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    That sounds like a good idea. This is what's listed as the Circuit Designation:

    • Pool Equipment Supply 1
    • Pool Equipment Supply 2
    • Pool Equipment Supply 3
    • Food Holding Equipment 1
    • Food Holding Equipment 2
    • Food Holding Equipment 3
    • Dishwasher
    • Fridges 1-4
    • Fire Alarm
    • 2 x Vending Machines

    I think I will be okay working out the Calculations, it's just finding them in the OSG and 18th Regs. I will give it a go and let you guys know what I have come up with.
     
  12. Strima
    Offline

    Strima Electrician's Arms

    Location:
    St Neots
    Google some specs for the above equipment, reference them to use as a base line. Don’t forgot to show where you got the information from such as supplying manufacturers spec sheets.
     
    • Like Like x 1
  13. RDB85
    Offline

    RDB85 Trainee Access

    Location:
    Liverpool
    Here is Question 4:
     

    Attached Files:

  14. Loki
    Offline

    Loki Trainee Access

    Location:
    Devon

    I have updated my Cables Calculation document that I used it now shows the correct pages for BS7671:2018 & Onsite Guide 2018

    Hope this helps
     

    Attached Files:

    • Like Like x 1
Loading...
Similar Threads - Question Design Project Forum Date
2365 305 design question New Member Introductions Yesterday at 3:08 PM
Part 'P' notification question? Electrical Forum Yesterday at 10:15 PM

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job