testing videos

[Phil]

all the credit goes to chris kitcher for these videos. nice and clear look into testing. its a shame we didn`t have him at college things would have become clearer a lot sooner.

 

[Phil]

[video=youtube;54C_FLSZaCY]http://www.youtube.com/watch?v=54C_FLSZaCY&feature=related[/video]
perspective short circuit current test

 

[Phil]

[video=youtube;9cxH_R3lB0o]http://www.youtube.com/watch?v=9cxH_R3lB0o&feature=related[/video]
ze testing

 

[Phil]

[video=youtube;9GRLM6sgDXM]http://www.youtube.com/watch?v=9GRLM6sgDXM&feature=related[/video]
ring final test

 

[Phil]

[video=youtube;Fvm_3ZkPYnc]http://www.youtube.com/watch?v=Fvm_3ZkPYnc&feature=related[/video]
earth fault loop

 

[Phil]

[video=youtube;Pq37_8Nu0QI]http://www.youtube.com/watch?v=Pq37_8Nu0QI&feature=related[/video]
safe isolation

 

[Phil]

if anyone else has any links to good testing videos feel free to add them

 

[john25]

lol I was gonna post these Vids 2 weeks ago But I can never embed videos on forums for some reason grr.

Anyways they are great vids that I watch regulary .Theres also some great Vids from the Learning louge on there on the 17th Ed/Pat testing etc

 

[john25]

[video=youtube;g_5irKWf18s]http://www.youtube.com/watch?v=g_5irKWf18s&feature=related[/video]


EDIT ahh I seam to be able to Embed the Vids now i'll find some more good Test Vids

 

[manda]

Great stuff. Thanks John!!!

 

[john25]

NP mate heres a couple of Vids of a small installation being Tested

[video=youtube;VytiM2V0x8g]http://www.youtube.com/watch?v=VytiM2V0x8g&feature=related[/video]

[video=youtube;flQiuX7zAjs]http://www.youtube.com/watch?v=flQiuX7zAjs&feature=related[/video]

 

[manda]

Thanks Phil. This guys pretty good at putting it across!

 

[john25]

Heres an Insulation test on a Bad Motor (It's an American test Vid but apart from the different coloured cables the Principle should Still be the same But please feel fre to remove if im Wrong though )

[video=youtube;Fyd3S1EWfYA]http://www.youtube.com/watch?v=Fyd3S1EWfYA&feature=more_related[/video]

 

[Paul.M]

We should start a new thread. Phil your brill. Also thanks to john.

 

[john25]

Heres a couple more test Vids

[video=youtube;WcPnILtxRSw]http://www.youtube.com/watch?v=WcPnILtxRSw[/video]

[video=youtube;JyU5z2kOqAM]http://www.youtube.com/watch?v=JyU5z2kOqAM&feature=related[/video]

[video=youtube;wbHSfHjMp28]http://www.youtube.com/watch?v=wbHSfHjMp28[/video]

 

[Jimmy Boy]

Great vids will save them...errmmm was it a deliberate mistake ?

Intro says 230V test ? Not on a 3 Line it's not !

 

[jpmiff]

Hi,

great vids, try googling elecctrical tests, took me to u-tube lots of clips on there!

 

[theguz]

correct procedure is the r1+r2 test after continuity test in ring cirs and his meter reads 0.04 ohms not 0.4 ohms as stated but still good vids

 

[AlanWirral]

Heres a couple more test Vids

[video=youtube;WcPnILtxRSw]http://www.youtube.com/watch?v=WcPnILtxRSw[/video]

[video=youtube;JyU5z2kOqAM]http://www.youtube.com/watch?v=JyU5z2kOqAM&feature=related[/video]

That's my college tutor

 

[i=p/u]

could any1 direct me to where the learner lounge is... pls thanks