Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss The importance of the ZS test whan changing an accessory in the Electrical Forum area at ElectrciansForums.co.uk.

Thread Status:
Not open for further replies.
Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. Murdoch
    Offline

    Murdoch Regular EF Member

    Location:
    Woking
    All this testing gets a bit boring doesn't it but just the other day I was changing a panel heater for a client and duly plugged in my MFT to check the Zs - the reading was 22.7! The main house sockets were 0.25 and the attached cottage was 0.35

    So today I went back today and conducted some investigation....this is what I found.

    Adaptable Box.jpg


    An approx 35 year old adaptable box, and where the T&E goes in at the top there is a gap, and at the bottom where the SWA was once firmly secure, its now loose. Bloody screws are rusted in so going back again to "gain access" and replace the box with a nice shiny wiska.

    All in a days (interesting) work!!
     
    • Like Like x 4
  2. GLENNSPARK
    Offline

    GLENNSPARK Electrician's Arms

    Location:
    west yorks.
    age becomes her...lol...
     
Loading...
Similar Threads - importance test whan Forum Date
zs result varing when testing garage DB Electrical Forum Thursday at 12:13 PM
Zdb testing on busbars Electrical Forum Wednesday at 11:03 AM
Thread Status:
Not open for further replies.

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job