Posting a message to the forum will remove the above advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Discuss Triton T200 RE Shower in the Electrical Forum area at ElectrciansForums.co.uk.

Thread Status:
Not open for further replies.
Please make sure you checkout our forum sponsors, many do discounts for members and, they keep the forum free to use.
  1. Mutley00
    Offline

    Mutley00 EF Member

    Location:
    Sheffield
    The Low Pressure Warning light is on and we can only get cold water out of it. I suspect its a faulty sensor in the 'base' unit but as its so old, no one at Triton is old enough to remember them!

    Has anyone any experience of them & how to fix them? I really dont want to take the whole thing out as it's only in a 2nd bathroom and it would involve taking out the suite and re-tiling to replace the shower, but if a quick fix is available, advice would be really appreciated?
     
  2. Leesparkykent
    Offline

    Leesparkykent Super Moderator Staff Member Super Moderator

    Location:
    Kent
    Triton T200re Shower Spares | TRITO-PARENT-34
     
  3. Mutley00
    Offline

    Mutley00 EF Member

    Location:
    Sheffield
  4. Leesparkykent
    Offline

    Leesparkykent Super Moderator Staff Member Super Moderator

    Location:
    Kent
    Yes it says the parts to cure this are now obsolete....
     
    • Like Like x 2
  5. Mutley00
    Offline

    Mutley00 EF Member

    Location:
    Sheffield
    Hence me making the post - I was hoping someone somewhere had sussed a workaround. Like maybe how to bypass what is clearly a dodgy sensor
     
    Last edited: Jun 27, 2015
  6. Leesparkykent
    Offline

    Leesparkykent Super Moderator Staff Member Super Moderator

    Location:
    Kent
    I doubt it as the sensors will clearly be there for a reason. The pressure release could of operated due to scale, have you tried disconnecting the shower head/hose and running the shower?
     
    Last edited: Jun 27, 2015
  7. Leesparkykent
    Offline

    Leesparkykent Super Moderator Staff Member Super Moderator

    Location:
    Kent
    Is there any water dripping from a over flow on the remote unit? Normally a clear tube.
     
  8. Mutley00
    Offline

    Mutley00 EF Member

    Location:
    Sheffield
    Thanks Lee - I'll have a shufti but we dont get scale in Sheffield.
     
    • Like Like x 1
  9. Dave OCD
    Offline

    Dave OCD Forum Mentor

    Location:
    Cornwall
    Business Name:
    Hendry Electrical Services
    Might even be a bunged up filter in the water inlet causing reduction in flow, this would also give the problem described.
     
Thread Status:
Not open for further replies.

Share This Page

Electricians Directory Post a Domestic Job Post a Commercial Job