Discuss Wagos and ferrules in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
22
Has anybody used a ferrule in a push fit wagos? I need to cut into a ring circuit to make a spur using singles (in conduit) but only have push fit wagos no good for flex as we know. I don't want to make a special trip in the morning and £20 on a box of latching wagos that I probably won't use again . What I want to know is if I use a ferrule will it fit in a orange 4way wago?
 
Hi,your singles should be stranded,which they accept,i think,from memory.

You could probably push a ferule on a fine wire in,if it didn't exceed the diameter of the Wago's maximum capacity,BUT,you may not find, Wago approve of such ingenuity,
 
Has anybody used a ferrule in a push fit wagos? I need to cut into a ring circuit to make a spur using singles (in conduit) but only have push fit wagos no good for flex as we know. I don't want to make a special trip in the morning and £20 on a box of latching wagos that I probably won't use again . What I want to know is if I use a ferrule will it fit in a orange 4way wago?
Do you mean Tri rated cable when you refer to flex?
 
Have you see that crazy PE post about Carbo e-paint. I thought was April Fools for a moment. Didn't want to say anything, think I might have already offended them, being so they are forum sponsors.
 

Reply to Wagos and ferrules in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi all. I'm going to replace some sockets during a routine redecoration of our lounge including replacing some singles with doubles with USB...
Replies
2
Views
642
Hi all, I’m after some advice regarding use of Wago boxes for adding a spur off a ring final. Is it okay to use a MF Wagobox with 221 Wago...
Replies
10
Views
3K
Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K
Hey, I lifted a few sockets from a wall so I could paint without having to cut in around them. I haven’t lifted any light switches yet. When...
Replies
4
Views
915
Hi all, Disclaimer: I'm not an electrician and have very basic knowledge of electrical installation. We've been putting in a new kitchen into an...
Replies
17
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock