work in progrees in Micro Brewery.

[Rpa07]

He’s got a nice shoe collection and a couple of wigs AND a gorilla suit - could be a winner!

I’d rather pooh in my hands and clap

 

[Toneyz]

He’s got a nice shoe collection and a couple of wigs AND a gorilla suit - could be a winner!

Was the moustache real then?

 

[StephenRowley]

Wouldn't happen to be in Leeds would it?

 

[telectrix]

@ westie. i can see your point. the original plan was to cleat all 3 cables, but then it would look like the london underground track. who is to say that a cleat can't support 3 cables? the cables are adequately supported and reasonably tidy. if there was a fire, OK, they's sag, but so would all the existing singles in pvc tube sag. as said before, my original plan was to run on 3" tray, but customer declined the additional £300 cost.

 

[Toneyz]

Whilst you have only posted work in progress how have you got the cables to the loads?

 

[Squid]

Those bends, shudders.......

 

[telectrix]

@SWD.youtry putting in nice bends in XLPE at 0 deg. celcius.

@ ant. cables to loads are 6.0mm silicon flex. glanded into isolators with stuffing glands, cleated to provide extra strain relief.

 

[Moley]

Those bends, shudders.......

I think you are missing the important bit here which is getting the brewery up and running. Appearance can be worked on later

 

[telectrix]

I think you are missing the important bit here which is getting the brewery up and running. Appearance can be worked on later

nail on head. it's ready to go. bit of tidying up to do after xmas, but will tie that in with some extra work he wants doing. he has to plumb in the pumps which are ready wired, then he's brewing.

 

[Toneyz]

nail on head. it's ready to go. bit of tidying up to do after xmas, but will tie that in with some extra work he wants doing. he has to plumb in the pumps which are ready wired, then he's brewing.

As I said work in progress just was asking.

 

[Toneyz]

Asking what exactly?

See posts 33 and 46.

 

[Dave OCD]

Tel you'll find as I've noticed that the most vociferous critics never,ever post up any photos of work they've done, I rest my case.
However it's a shame that one of those side by side isolators is 5mm higher than the other.

 

[TJ Anderson]

Crikey.....the poor old client can't even afford tray and you're splashing out on XLPE SWA over PVC....beggars belief

 

[telectrix]

Tel you'll find as I've noticed that the most vociferous critics never,ever post up any photos of work they've done, I rest my case.
However it's a shame that one of those side by side isolators is 5mm higher than the other.

they are not out.it's called parallax. makes them seem out.

 

[Dave OCD]

Nah the 63 is a bit higher than the 40 on the right.

 

[GMES]

they are not out.it's called parallax. makes them seem out.

Is that what you were Tel when you did the install.

 

[davesparks]

Work in progress give the Bloke a chance Lads, he ain't packed his stuff away yet. Jeez talk about putting the boot in. After all nobody is perfect, are they????????

You're normally the first to criticise when a photograph like that appears on here, bemoaning the demise of the real tradesmen.

 

[LeeH]

I did mine in plastic...

Still need to finish it off as some wet pants (me) realised he had to run copper behind the conduit.

 

[Midwest]

Why do you need a massive control panel, to operate some tea urns?

 

[LeeH]

The chicks love it.