Would this cause me to fail my Am2?

[Derry94]

hi everyone ,

I’ve just completed my am2 I think I did fairly well on everything the only thing that’s bugging me is, on my shedual of test results I’m sure I put the wrong size cpc for the c/o detector circuit.

I put the cpc as 1mm however I think it was 1.5 would this one thing cause me to fail?

 

[buzzlightyear]

what size tails did you put in ?

 

[Derry94]

Was 1.5 fp200 gold

 

[buzzlightyear]

1.5 /1.0 mm CPC
1.0/1.0 mm CPC
2.5 /1.5 mm CPC
half of the main conductor size and list goes on .

 

[Derry94]

That’s for fp200 yeah? Thank you very much

 

[buzzlightyear]

That’s for fp200 yeah? Thank you very much

have you not got the onsite guide .

 

[telectrix]

think you are right with 1.0mm cpc for 1.5mm FP200.

 

[Ian1981]

1.5 /1.0 mm CPC
1.0/1.0 mm CPC
2.5 /1.5 mm CPC
half of the main conductor size and list goes on .

It’s never half tho is it twin and earth speaking anyway or anything else.
6mm / 2.5mm cpc
4mm/ 1.5mm cpc Etc etc

 

[Simonslimline]

I very much doubt you would fail if thats all you got incorrect on the the paperwork side of things. I am pretty sure i forgot to tick that i had carried out Phase sequence testing and also pretty sure i put my RCBO down as a 60898 rather than 61009!

Still passed though no problems.

I would say you should be fine. When did you take it? You normally find out if you have passed the same day by email.

Best of luck.

 

[westward10]

That’s for fp200 yeah? Thank you very much

That is incorrect for FP200.

 

[Derry94]

I very much doubt you would fail if thats all you got incorrect on the the paperwork side of things. I am pretty sure i forgot to tick that i had carried out Phase sequence testing and also pretty sure i put my RCBO down as a 60898 rather than 61009!

Still passed though no problems.

I would say you should be fine. When did you take it? You normally find out if you have passed the same day by email.

Best of luck.

I finished it yesterday so I’m assuming il get my results on Monday as it’s the weekend, really wish they’d just put me out of my misery now

 

[Simonslimline]

I finished it yesterday so I’m assuming il get my results on Monday as it’s the weekend, really wish they’d just put me out of my misery now

Where did you take it?

The paperwork has a maximum number of points available so if you only made a small error like this you should be ok IMHO

 

[KEV 1 N]

The conductors in an FP type cable are all the same size, unlike t&e (except 1mm t&e)

 

[Derry94]

Where did you take it?

The paperwork has a maximum number of points available so if you only made a small error like this you should be ok IMHO

Okay so it’s a points based system ? I was worrying because I thought one thing wrong = fail, I took it at Harris house in Harlow

 

[Derry94]

The conductors in an FP type cable are all the same size, unlike t&e (except 1mm t&e)

Hopefully this doesn’t cause me to fail

 

[Simonslimline]

Okay so it’s a points based system ? I was worrying because I thought one thing wrong = fail, I took it at Harris house in Harlow

You should be fine. Worst case is you have to retake just that section.
Enjoy the sun and check your emails tomorrow. Keep us posted.

 

[Simonslimline]

Okay so it’s a points based system ? I was worrying because I thought one thing wrong = fail, I took it at Harris house in Harlow

You should be fine. Worst case is you have to retake just that section.
Enjoy the sun and check your emails tomorrow. Keep us posted.

 

[Gareth Brookes]

1.5mm2 fp200 has 1.5mm2 cpc
2.5mm2 fp200 has 2.5mm2 cpc

 

[Gareth Brookes]

1.5mm2 fp200 has 1.5mm2 cpc
2.5mm2 fp200 has 2.5mm2 cpc

 

[Derry94]

Just received my results by email and I passed! I can stop stressing now thank god