2 circuits in one cable.

[westward10]

You definitely cannot use two cables for a three phase circuit with the cores split over them.

 

[pc1966]

You definitely cannot use two cables for a three phase circuit with the cores split over them.

Indeed. I am awaiting the EICR she has commissioned, I expect there to be more C1/C2s than anything else.

 

[oscar21]

Just to update this thread, we've steered well clear of the original electrics and put our own little consumer unit in for our new work. The standard of their "re-wire" was appalling. There were things like the summer house/bar being fed from a 2.5 SWA drilled through the wall with a plug on the end shoved into a socket, when I took the top off all the wires fell out. They wanted the original downlights extending into the new bit but the way they were terminated was as bad as I've seen so we just put our own circuit in.

The customer didn't seem bothered at all so its obviously her "builder" dad that did it otherwise she would be looking for her money back I guess.

 

[7029 dave]

So how did you get round the proposed intermediate switching or did you just leave it 2 way.

 

[oscar21]

So how did you get round the proposed intermediate switching or did you just leave it 2 way.

We just left it as it was, again the customer didn't seem too bothered, dont think she wanted me digging any further.