A Calibrated Question (Multi Meters)

[OnlQQker]

I have a Kewtech KT63 which I picked up a couple of years ago for testing stuff in the shed.
It has just run out of calibration and I'm not sure whether to contact Kewtech and ask them who to calibrate it or what?

I know on Ebay people are calibrating but you have to package it up and send it away, but my mate who works in Edmunson's, Leighton Buzzard (who I popped in and saw earlier) has just given me this flyer, he also mentioned that if it wasn't ready the same day and I needed to pick it up Friday, then they have a free burger van and drinks.

What he doesn't know is I can eat at least 25 quid's worth of bacon rolls, let alone free coffee!

 

[LukeD]

I think they come to the CEF branch and sit down to process all that have been handed in. So one trip for the tester(s) and probably 20 odd items to do.

Not a Huge amount ...Especially if CEF want a fee etc

 

[DPG]

Not a Huge amount ...Especially if CEF want a fee etc

I reckon CEF probably waive any fee because they will probably sell more stuff when all the people come in for cheap calibration.

 

[pc1966]

I reckon CEF probably waive any fee because they will probably sell more stuff when all the people come in for cheap calibration.

LOL - you are assuming they have it in stock!

 

[mattg4321]

I think they come to the CEF branch and sit down to process all that have been handed in. So one trip for the tester(s) and probably 20 odd items to do.

They do more like 80-100 in my local branch on the CEF day. All at £30 a pop. Work it out…

 

[westward10]

Never trust these calibration days. I have said before we sent some in and mixed in by accident was an analogue insulation continuity tester which just read open continuity all the time. Came back with a calibration certificate so i tried it, still open continuity even with various leads.

 

[LukeD]

Never trust these calibration days. I have said before we sent some in and mixed in by accident was an analogue insulation continuity tester which just read open continuity all the time. Came back with a calibration certificate so i tried it, still open continuity even with various leads.

Exactly .... its a "Drive by calibration" service .

 

[LukeD]

They do more like 80-100 in my local branch on the CEF day. All at £30 a pop. Work it out…

How many guys carrying out the tests?

 

[mattg4321]

Two I think. It’s a good earner for them

 

[Mike Johnson]

I use a CalCard, keeping a record of last and current readings gives me what I need to know.

 

[DPG]

I use a CalCard, keeping a record of last and current readings gives me what I need to know.

I use a check box in a similar way. Good to use inbetween 'proper' calibrations. Covers resistance and IR, but obviously not RCD trip times and levels.

 

[pc1966]

Covers resistance and IR, but obviously not RCD trip times and levels.

That is the aspect of my MFT I can't check myself. The closest I can do is test one of my home sockets to see it has not changed much which, while better than nothing, is not quite enough to be sure.

I have a CalCard and really would recommend it as a handy way to check the low/high R ranges. I also have other meters that can be used to verify AC volts but the Zs & RCD stuff then I only have the one MFT.

 

[DPG]

That is the aspect of my MFT I can't check myself. The closest I can do is test one of my home sockets to see it has not changed much which, while better than nothing, is not quite enough to be sure.

I have a CalCard and really would recommend it as a handy way to check the low/high R ranges. I also have other meters that can be used to verify AC volts but the Zs & RCD stuff then I only have the one MFT.

The Metrel Eurocheck checkbox is very good as it does RCD and Zs tests as well as the IR/resistance checks. But I've just checked the current price is nearly £350.

 

[pc1966]

The Metrel Eurocheck checkbox is very good as it does RCD and Zs tests as well as the IR/resistance checks. But I've just checked the current price is nearly £350.

Interesting to see, a lot cheaper than the usual cal systems (they are £5k-15k I believe) but not quite enough for a single MFT, given the cal box needs cal'd as well!

If you were in a small company though it would make financial sense so 5 or so MFT could be regularly checked against it, and once a year the cal box sent out for a full check.

 

[DPG]

Interesting to see, a lot cheaper than the usual cal systems (they are £5k-15k I believe) but not quite enough for a single MFT, given the cal box needs cal'd as well!

If you were in a small company though it would make financial sense so 5 or so MFT could be regularly checked against it, and once a year the cal box sent out for a full check.

Exactly my thoughts. If it was under £200 I'd say everybody should have one.

 

[pc1966]

For general info, it is Automated Calibration Services who do the CEF cal day work:

ACS

The certificates I received says they use this bit of test kit (at least for MFT/PAT use I think):

Electrical Test Equipment Calibrator | Transmille

www.transmille.com

I don't see a UK price but a USA site is saying "Starting at $13,800.00" so around £11.3k
Others I see mentioned are more affordable (for a given definition of "affordable") such as this one:

5030 Electrical Tester Calibrator

Clearly displays measurements and settings via Large LCD. For calibration of RCD, loop, insulation, earth testers and multifunction installation testers.

www.timeelectronics.com

Is it currently on sale at £4,209+VAT from here:

Time Electronics 5030 Electrical Tester Calibrator

Calibrate RCD, loop, insulation, earth, and multifunction testers Large, clear LCD with intuitive menus Simulate RCD trip times, loop impedance, insulation resistance, and measure test voltage and currents

www.tester.co.uk

It looks less flash, so maybe less automation so not as good for quick turn-around use.

Another one I see mentioned around is this, though it is not claiming to be MFT style calibration:

Rent or Buy Fluke 5502A Multi-Product Calibrator

You can rent or buy a Fluke 5502A from Axiom Test Equipment. Contact us for additional details.

www.axiomtest.com

Again, only a USA site coming up with a price on a quick search and they are saying it is usually sold at $22,822 so around £18.6k

 

[Mike Johnson]

I use a CalCard, keeping a record of last and current readings gives me what I need to know.

Didn't mention that I test RCD/RCBO's in my own home on the same socket each time, and take a note of times etc and check against last readings, but then I am retried, and only do very small works for family and friends, in fact none this year yet.

 

[LukeD]

What is the expected time for a MFT calibration ? is it 10 mins? 20 mins etc ????

 

[LukeD]

For general info, it is Automated Calibration Services who do the CEF cal day work:

ACS

The certificates I received says they use this bit of test kit (at least for MFT/PAT use I think):

Electrical Test Equipment Calibrator | Transmille

www.transmille.com

I don't see a UK price but a USA site is saying "Starting at $13,800.00" so around £11.3k
Others I see mentioned are more affordable (for a given definition of "affordable") such as this one:

5030 Electrical Tester Calibrator

Clearly displays measurements and settings via Large LCD. For calibration of RCD, loop, insulation, earth testers and multifunction installation testers.

www.timeelectronics.com

Is it currently on sale at £4,209+VAT from here:

Time Electronics 5030 Electrical Tester Calibrator

Calibrate RCD, loop, insulation, earth, and multifunction testers Large, clear LCD with intuitive menus Simulate RCD trip times, loop impedance, insulation resistance, and measure test voltage and currents

www.tester.co.uk

It looks less flash, so maybe less automation so not as good for quick turn-around use.

Another one I see mentioned around is this, though it is not claiming to be MFT style calibration:

Rent or Buy Fluke 5502A Multi-Product Calibrator

You can rent or buy a Fluke 5502A from Axiom Test Equipment. Contact us for additional details.

www.axiomtest.com

Again, only a USA site coming up with a price on a quick search and they are saying it is usually sold at $22,822 so around £18.6k

Someone mentioned "Time" offer ex demo /used once/ maybe the packaging is bashed offers to boost sales ....

 

[pc1966]

What is the expected time for a MFT calibration ? is it 10 mins? 20 mins etc ????

I have no idea.

Based on my new certificate, it has 24 measurements so at 30s per test that is 12 minutes. Which is realistic but assumes the operator is familiar with that type of MFT, etc.

But I don't know if MFT have a secret test connector that would allow an automated stepping throgugh the tests and recording of results. That might take it below 5 min per instrument.

 

[westward10]

These calibration days I would guess as long as it takes to print off the Certificate and put some tamper stickers on it.