Search the forum,

Discuss Mains Electrical feed to UFH in the Electric Underfloor Heating Wiring area at ElectriciansForums.net

Reaction score
2
I'm planning to install a U-Heat mat in a small en-suite. Never done one before. The thermostat will be on the adjacent bedroom wall. What is the recommended method of providing the live feed to the thermostat/on off switch unit? From a fused connection unit, switched fused connection unit or a spur off a nearby ring socket? The walls are studs and not yet plasterboarded in the en-suite. The ring is RCD protected at the Consumer Unit. tia
 
spur off rfc. fit a double pole SFCU so that in the event of a fault in the ufh, both poles can be isolated locally.
 
underfloor heating is notifiable irrespective of whether it's in a bathroom or not.
 

Reply to Mains Electrical feed to UFH in the Electric Underfloor Heating Wiring area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top