We have a room in the house that was the kitchen. That has been relocated to a different area, so the old kitchen has been sold off and the room will be a bathroom. I’ve studded out the room and lined with cementitious board ready for tiling. All first fix plumbing is done. All sockets are...
Hi, I`m looking for an advice.
I have an electric shower that I`m not using due to boiler changed to combi and added shower over bath feed by a 6mm cable and 40 amps fuse. The cable is quite newish (blue & brown) compared with the rest of the house (red & black).
I want to create a new radial...
I’m rewiring a bungalow and the owner has asked for a radial for all sockets except the kitchen. But there will be a separate washer and dryer in the circuit. Will a 20A radial be enough?
Hello Electrical world.
Looking for thoughts and opinions. Currently planning out my kitchen re-wire for new kitchen.
I was originally planning on having my washing machine 9.1A, tumble dryer 6.5A, dish washer 8.5A on there own radial circuit. Total current 24.1A, protected by a 25A circuit...
HI All,
I am building a new house (self build) and have my part P so am running the cabling. My reading of the regs says that any appliance of over 2KW should not be supplied by a ring main and should have a 4mm radial. (BS 1363)
My questions are really around this- - It seems all of my...
Hi everyone. Im new here...
I need advice on wether it is safe and okay to have 3 × 13amp fcus on its own radial with each having single socket to supply a....
1st) fcu at 13amp-fridge/freezer
2nd) fcu at 13amp-washer/dryer combo
3rd) fcu at 13amp-Dishwasher
They will be protected by 4mm...
This is a topic that comes up a lot and seems to attract near-religious levels of fever in how folks argue over the choice of circuit for UK sockets. However, often the arguments are ill-informed or they veer off in to pointless corners, or sometimes get personal. This is my attempt to put a lot...
Hello everyone,
Back again after receiving great advice for the bathroom a few months back. This time I'm making a mess in the kitchen.
We have a 32A MCB to radial final which goes to a cooker control switch which also has an integrated 1 gang socket. Off of this is a double socket which...
Could you tell me please if I am allowed in England to replace by myself the 2.5mm cable from a radial circuit to 4mm and the 16Amp MCB it has now for a 32Amp?
I do love my job, and this is a fabulous job to be involved with, but jez the regs aren't clear on this type of thing.
In a house, you have either 2.5mm or 4mm on radial circuits. That's fine - but a caravan has nothing like the load (At most 16A is coming in from a mains hook up). So...can I...
Hi,
So I've just started to install some spotlights in a room in my house, and I always thought to use 1.5mm T&E so I've wired them all up and I've come to connect the main line in and noticed that it is 1.0 T&E. Am I okay to link the main line to my daisy chained spots on 1.5.
Some more...
Guys needvadvice please
I was asked to carry out an annual inspction of a DB recently
There are 12 in number radial circuits suppling sockets wired in 4mm singles protected by 32A mcb the cables are enclosed in metal trunking and supply 13a socket outlets , are the mcbs now overated as the...
Fault finding today,
no continuity on a FRC turns out to be 1 complete leg of the ring is simply not there. cant run new cable in due to decor/tiled floor
I was going to split the remaining sockets into 2 radials which would mean 1 radial with 3 sockets and 1 radial with only 1 socket
this...
I'm building a new property consisting of 4 sperate discrete buildings, all roughly in a straight line. My question: Is there any advantage to connecting the buildings supply in a ring rather than just daisy-chaining them (i.e. radial)?
I was planning to run a single 1 AWG backbone supply up...
Is a 20A 2.5mm radial sufficient for 2 sockets in a utility room? Will be a tumble dryer/washing machine plugged in and a spare socket used for a Hoover occasionally.
Just a quick one
When you see two lines on one MCB that could be either a ring or two radials.
The only way to determine which is through testing. Is that true?
Are there any best practices regarding this?
For example, would you ever see three lines on an MCB? One ring, one radial? Or three...
Hi. I will soon be wiring up my summer house. My plan is to run 10mm2 SWA from spare 50A breaker on my house consumer unit (approx 20m) to a 40A garage consumer unit with 6A MCB for 1.5mm2 lighting circuit and 32A for 2.5mm2 RFC. I plan to have 5 double sockets which will have heater, TV and...
Hi.
I have a radial circuit supplying electricity to the garage (part of the house). It's on a 20amp breaker, uses 2.5mm cable. It currently only supplies a single socket. Before anyone asks, its 100% a radial circuit. 6 months ago I had an electrician install a new consumer unit, and the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.