Recent content by Benjy
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Silly me found I had chopped off the other cores for getting a nice neat install all those years ago. I just got a 100m 8 core reel for a fiver in Maplin. Replaced the cable to the panel and installed the sealed metal heavy duty contacts. Fingers crossed thats the end of the false alarms. I will...- Benjy
- Post #25
- Forum: Security Alarms, Door Entry and CCTV (Public)
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Yeah sorry TP not PA- Benjy
- Post #24
- Forum: Security Alarms, Door Entry and CCTV (Public)
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Will do. Last couple of days no false alarms with the contact disconnected and cable shorted. Only thing is this intermittent fault is just that and could take alongtime to reoccur. Going to give the cable connection inside the main panel a wiggle next as poster above mentioned dry joints.- Benjy
- Post #21
- Forum: Security Alarms, Door Entry and CCTV (Public)
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Its a large wooden shed. All the years I have had it I have used the same internal type contacts, PIR and shock sensors. The last one I used was the heavy duty for larger gap, however I have hardly any gap and the contacts have always remained level with one another. The door is a reinforced...- Benjy
- Post #16
- Forum: Security Alarms, Door Entry and CCTV (Public)
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Cheers for the welcome. The cable is the six core, I did away with the tamper just incase it was that but the panel would have indicated PA. It triggers as if the door has opened. The cable is quite short as it is close to the main panel and I have inspected its entire length it has no damage...- Benjy
- Post #14
- Forum: Security Alarms, Door Entry and CCTV (Public)
-
B
Accenta Gen4 - Magnetic Contacts Repeat Failure.
Something I have found nobody has experienced before, just me unfortunately, but I thought I'd try you guys for one last fault finding. Thank you in advance. Over some years I have had to keep replacing the magnetic contacts on my outbuilding where I have the Accenta Gen4 system setup. Issue...- Benjy
- Thread
- accenta contacts failure magnetic
- Replies: 24
- Forum: Security Alarms, Door Entry and CCTV (Public)
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
- Latest: brianmoooore
-
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.