Hi,
took your advice and got the cable. I have a question can i use crimp connectors on the N/E/L ends to get a better connection on the screw terminals on the meanwell and if so what sort ,
Thanks ever so much
Thanks for using my proper name of LeeBoy, i noticed my original message contained discoeye which is another name i use for another forum. Whoops:praying:
Hi Guys & Girls,
i have an enclosed Meanwell LRS-350 12V switching power supply and to get it up and running ,3 core flex has to be connected direct to the unit{bare wire} and the other end a 3 pin uk mains plug.
So my question is as follows what size 3 core flex should i use to connect it all...
which has to be connected to the transformer before the bell wire is connected to the bell, i would recommend buying some spare fuses just in case of any power surges or when you turn the fuse box off for any reason. The ring app will give you a full health check and let you know if the power is...
Hi Ya,Dantech DA652 24V AC 1.5A single output in-line power supply . This was bought from amazon to power the ring pro and i have had no problems at all. The company has its own website and are based in essex, when you purchase the bell you then need to contact ring and request their inline...
Hi PETE, OK HERE GOES :IF YOU HAVE AN EXISTING BELL/TRANSFORMER RUN FROM CU ITS A TWO MINUTE OF PUTTING IN A SUPPLIED CABLE IN THE EXISTING BELL AND WIRE UP BELL AT THE DOOR JOBS A GOOD UN. THE PRO RUNS AT 24V AC AND PRETTY MUCH ALL UK BELL TRANSFOMRERS RUN 12V AND THATS NOT ENOUGH SO SUPPLIED...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.