what ever happened to a good pair of Elliot Lucas pliers and snips, a set of footprints and a Yankee , and almost all drivers were Stanley , stepping back in time :)
why not just use MK flange boxes, fitted hundreds of them with out a problem using 1" 1/2 6's. Cut the plaster out with a stanley knife then carefully cut the lath out.
I had the exact same thing many years ago, same voltages at fittings and switches as you describe ,which destroyed every ballast on the board. Mine was an Independant lighting TP and N DB serving corridor, staircase lighting etc. It turned out that the old MEM switchfuse supplying th DB had a...
Get yourself a Krone backmount or profile frame and use 3 krone cat 6 highband modules , each module takes 2 cables and will maintain the cable performance. Doing it this way is classed as a consolidation point and perfectly acceptable.
A lot of large office fit outs use CP's dotted around with...
is it possible that the lighting neutrals are crossed at the rcbo's , are the neutrals easily traced back at the board to match the feeds to double check
leave plenty of spare , a nice maintenance loop in the server room for any changes like future cab upgrades relocations etc, not nice doing a consolidation joint on lots of cables if short in the future.
same at the floor boxes , alot of these lift out tiles can get lifted out and relocated to...
after testing cat 6 have you changed from class E to class F and reset the referance, just a thought , have you selected cat7 as well as class F and selected the correct NVP %, Siemon would ask us to change the NVP to 68% when testing their cat6 cable. Another thought could be other contractors...
If the pyro gland back nut isn't tightened up onto the olive then a banjo/frying pan isn't going to do much. Earth tail pots aren't really needed unless glanding into plastic, geez bare pyro now that takes me back.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.