I just changed out a 3 gang switch box in my bathroom to a single gang box with a 3 single pole switch. It works fine but wondering if I need to worry about overheating. It is a deep single gang box which just fits in the 2 x 4 wall but there are 5 wires going into this box. Do I need to get a special box that would give more room or is it fine to stay the way it is.
Discuss Changing a 3 gang switch box to a single gang switch box in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Changing a 3 gang switch box to a single gang switch box in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi, in my bedroom i had a 2 gang dimmer that powered 2 set of 3 spot lights and also had passthrough wires to other sockets. Im changing to just...
DIY'er question:
I have a singe switched fused spur above my kitchen counter, providing power to an undercounter fridge socket beneath it. The...
I have 3 gang switch that I would like to convert to a 2 gang switch. I have no need now or in the future for the 3rd switch and aesthetically the...
Hi All,
I am looking to install a Quinetic double gang in line receiver switch (QURS2W) in my hallway on the ground floor to control the lights...
I'm installing smart modules in my light switches which means I need to replace the existing 25mm back boxes with 47mm ones. Downstairs all walls...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.