Dodgy trade pictures for your amusement! - 1 Million Views!

[Darkwood]

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.



I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. mg_smile:

 

[sheppertonspark]

I think the neutral might have been a bit loose!

 

[sheppertonspark]

Open ended cable chucked under the office floor tile, they could've at least turned the Isolator Off !

 

[sheppertonspark]

DIY at its best.

 

[sheppertonspark]

Don't put the junction boxes in the wall cavity it makes fault finding really hard - Builders again.

 

[sheppertonspark]

Buried in the Lounge wall, neutral continuity fault on Ring Circuit, found it with a Fluke cable tracker, couldn't believe how accurate it was.

The cable had been cut when they chased in some speaker cables, The line on the wall is where the tracker said the break was, impressive bit of kit.

 

[Mike Johnson]

Impressive bit of kit indeed, at the cost I would expect it to repair the break automatically as well.

 

[Dave OCD]

And make tea for you as well

 

[LewisM]

Might catch some diyers out

 

[MJPD29]

Might catch some diyers out

View attachment 106786

Worked in a large government building where majority of lighting was wired in blue, black and earth single, blue being phase and black neutral. The sheer amount of fittings with reverse polarity was scary.

 

[littlespark]

Worked in a large government building where majority of lighting was wired in blue, black and earth single, blue being phase and black neutral. The sheer amount of fittings with reverse polarity was scary.

are you sure it wasn't black line and blue neutral?

most fittings can work reversed.... its just when line somehow gets connected to cpc that things get tricky... as the upside down sticker in the picture would could lead to

 

[Dave OCD]

It would have been pre colour changes I expect from a 3 phase db with blue being the phase colour supplying that particular circuit.

 

[brianmoooore]

are you sure it wasn't black line and blue neutral?

That's the way around I'd expect. We changed to blue because it was the most common neutral colour, and away from black as neutral because it was used as live in some countries, as it is now in the UK.

 

[Dave OCD]

It all depends on the age of the install, which we don't yet know.

 

[123]

That's the way around I'd expect. We changed to blue because it was the most common neutral colour, and away from black as neutral because it was used as live in some countries, as it is now in the UK.

And what a well thought out move that was. Would have been far better keeping it as it was.

 

[nicebutdim]

Worked in a large government building where majority of lighting was wired in blue, black and earth single, blue being phase and black neutral. The sheer amount of fittings with reverse polarity was scary.

Had similar last week. Building from around 2000, with emergency lighting using black for neutral, red switched live and blue permanent live. Strange thing was this was all in some sort of shielded flex, so I couldn't understand why these colours were present.

 

[MJPD29]

are you sure it wasn't black line and blue neutral?

most fittings can work reversed.... its just when line somehow gets connected to cpc that things get tricky... as the upside down sticker in the picture would could lead to

I thought it was originally but traced it back to find the circuits wired in red, yellow, blue singles with black neutral. All fittings had been changed to led and working with reversed polarity. Only realised when we went to test.

 

[Dave OCD]

Ah old Dave guessed correctly.

 

[MJPD29]

Had similar last week. Building from around 2000, with emergency lighting using black for neutral, red switched live and blue permanent live. Strange thing was this was all in some sort of shielded flex, so I couldn't understand why these colours were present.

That's a strange one. Was there a yellow in it or just red/black/blue?

 

[nicebutdim]

That's a strange one. Was there a yellow in it or just red/black/blue?

Red, black, blue & green/yellow, with shielding.

Was thinking maybe a yellow core had been cut back, but I'd changed a load of fittings and don't remember any signs of another core.

 

[Mike Johnson]

Was it the wasps or the mice that eat the phone cable?

Ahh photo too large for the server to process.

 

[littlespark]

Ahh photo too large for the server to process.

I screenshot a phone photo, then crop out the extra screen… reduces the picture enough to be under the size limit.

Or crop the original.??

 

[LewisM]

Was it the wasps or the mice that eat the phone cable?

Ahh photo too large for the server to process.

You can use an image compressor such as Easily compress images at optimal quality in seconds. - https://www.iloveimg.com/compress-image

To reduce the file size

 

[Mike Johnson]

Was it the wasps or the mice that eat the phone cable?

Ahh photo too large for the server to process.

Thanks guys.

 

[happysteve]

Mural wiring... looks legit

Wait, what?

A call to WPD National Grid, and 2 hours later...

 

[happysteve]

Can't really blame the workmanship or materials in this case. On the end of the 4-way extension lead was a small heater, a chest freezer, a fridge and yes, you've guessed it, a tumble dryer. I'm surprised it lasted as long as it did.

 

[timhoward]

Making sure….respect to the sparks who went the extra mile!

 

[brianmoooore]

Making sure….respect to the sparks who went the extra mile!
View attachment 107048

Probably a lathe and plaster wall. I've used every screw hole available on many occasions, plus a bit of adhesive on the back.

 

[timhoward]

Probably a lathe and plaster wall. I've used every screw hole available on many occasions, plus a bit of adhesive on the back.

Exactly this - only two of them were actually doing anything. This house has a mixture of L+P, L+P with plasterboard on top, and in one case L+P ceiling with OSB board and then ceiling-board which made fishing delightful fun...

 

[pc1966]

Probably a lathe and plaster wall. I've used every screw hole available on many occasions, plus a bit of adhesive on the back.

I absolutely hate lath & plaster.

Nothing to do with my parents house, my flat, and my sister's house all having the damn stuff and needing odd jobs done over the past few decades

 

[nicebutdim]

Exactly this - only two of them were actually doing anything. This house has a mixture of L+P, L+P with plasterboard on top, and in one case L+P ceiling with OSB board and then ceiling-board which made fishing delightful fun...

Just rewired a house in which old tongue & groove timber was directly behind plasterboard on ceilings and stud walls. An absolute pleasure to work with.