Currently reading:
Moaner

Discuss Moaner in the UK Electrical Forum area at ElectriciansForums.net

cliffed

-
Arms
Supporter
Reaction score
650
i know I'm a old git,but here's one for you,been quite cold lately,got some youngsters working with us,nice & warm in the offices,when it's brekkie time,I always sit in my van,especially if it's cold outside.The lads also sit in their van,but switches the engine on,to get warm.
Me,I put on another layer of clothes,so...the vans are on tracker so they know what's happening,back at the yard,does anyone care.
In my day we just wouldn't do that,wasting diesel etc.
Last year in 30°heat,a lad sat in his van,I went over to him & said why have you got the engine running,wound down his window,I've got the air conditioning on,am I mad to get frustrated ha ha
 
I may be a bit younger than you guys [not that much though:)] but your posts bring back memories of freezing sites, great times when you think back though. And there were none of those ridiculously large 'site radios' blasting away either. And I'm sure cooperation between trades was much better back then, only this week I went back to 2nd fix a high spec shed which is to be a home office with flush sockets, a fancy electric rad and downlights etc. I'd fitted metal boxes and noggins all spot on for height and depth etc. Along came the shed blokes to do the ply lining and they took out all the boxes and brought the cables through 15mm holes drilled in the ply because 'they had nothing to cut the box holes out with' ffs....
 
Our current apprentice is a nightmare, no motivation, no practical ability at all, complains all the time. I had to show him how to switch on an old MK 13a socket the other day because he couldn't switch it on. :( Spends most of the time checking his hair in the mirror....
And I'm sure cooperation between trades was much better back then, only this week I went back to 2nd fix a high spec shed which is to be a home office with flush sockets, a fancy electric rad and downlights etc. I'd fitted metal boxes and noggins all spot on for height and depth etc. Along came the shed blokes to do the ply lining and they took out all the boxes and brought the cables through 15mm holes drilled in the ply because 'they had nothing to cut the box holes out with' ffs....
I know what you mean, we did out a load of houses, the boarders were so crap they couldn't cut the holes for the boxes in the right place, all they had to do was knee the board and cut around the mark!! So they'd cut a hole in their board, undo the box fixing screws and then rest the box in the hole in the new position! They soon stopped that ---- when they found the holes in the board had been enlarged with our hammers so the boxes could be put back where they should have been...

I can't find the photos, but here is some more stupidity that is becoming more and more common.

View attachment 35284
 
Last edited:
Out current apprentice is a nightmare, no motivation, no practical ability at all, complains all the time. I had to show him how to switch on an old MK 13a socket the other day because he couldn't switch it on. :( Spends most of the time checking his hair in the mirror....

I know what you mean, we did out a load of houses, the boarders were so crap they couldn't cut the holes for the boxes in the right place, all they had to do was knee the board and cut around the mark!! So they'd cut a hole in their board, undo the box fixing screws and then rest the box in the hole in the new position! They soon stopped that **** when they found the holes in the board had been enlarged with our hammers so the boxes could be put back where they should have been...

I can't find the photos, but here is some more stupidity that is becoming more and more common.

View attachment 35284
Can't believe it can you
 
I may be a bit younger than you guys [not that much though:)] but your posts bring back memories of freezing sites, great times when you think back though. And there were none of those ridiculously large 'site radios' blasting away either. And I'm sure cooperation between trades was much better back then, only this week I went back to 2nd fix a high spec shed which is to be a home office with flush sockets, a fancy electric rad and downlights etc. I'd fitted metal boxes and noggins all spot on for height and depth etc. Along came the shed blokes to do the ply lining and they took out all the boxes and brought the cables through 15mm holes drilled in the ply because 'they had nothing to cut the box holes out with' ffs....
Site kin radios wtf are they?
 

Reply to Moaner in the UK Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock