**Show Us Your Installs!!!**

[Spudnik]

Right chaps,

Due to a few unavoidable issues, we have lost the original thread and pics etc.

Sorry about that!!!

So, if you want to re-upload your pics then great, if not, give us something new!


Cheers!!

 

[CSEE]

One of my Refrigeration Plant Installs, showing Tray,Ladder Rack and Control Panels

 

[markc123]

credit where credit's due, CEE that install seems bob-on, really tidy - good to see. Well done buddy.

 

[craigday]

little fuseboard I had to start/finish in one day from mounting trunking, fuseboard ect

- - - Updated - - -

pic wont post sorry

 

[jonni770]

trunking

I devised a nice way of cabling in trunking making it alit easier to put covers on. And to add cables in future

 

[jonni770]

trunking

Not all pics uploaded

 

[Dan the spark]

Re: trunking

Not all pics uploaded

Must have taken u a while to drill that lot lol, not picking holes but if that's fire alarm should that not be p-clipped in the trunking as opposed to cable tied?

 

[onions1066]

Very true dan especially on a staircase. Which I suspect is probably an escape route, we recently did a job in PVC conduits but the made us put galv saddles on for this exact reason. Looked mmmmmmmmmmmmm nice ish lol

 

[sparkless]

playing with new camera

 

[Fin170]

Neat but all your lights are on one side and sockets on the other?

 

[kingeri]

Is that a Square D? I find them really tight on space.

 

[sparkless]

Neat but all your lights are on one side and sockets on the other?

it was a bungalow, so only one light circuit. the other you can see was outside lights

 

[onions1066]

Even on a bungalow I would still recommend 2 lighting circuits. Why would you only put one in?

 

[sparkless]

Is that a Square D? I find them really tight on space.

British General, fully loaded £55 from electrafix

 

[sparkless]

Even on a bungalow I would still recommend 2 lighting circuits. Why would you only put one in?

it was only a DB change, so circuit was already in

 

[onions1066]

it was only a DB change, so circuit was already in

Are you pulling down my pantyhose? DBS swap in brown and blue............. Sounds very similar to what I would say........I promise darling I didn't search that on the Internet.:-------::-------:

 

[sparkless]

Are you pulling down my pantyhose? DBS swap in brown and blue............. Sounds very similar to what I would say........I promise darling I didn't search that on the Internet.:-------::-------:

they had a garage converted into a kitchen and wanted the DB in a cupboard instead of under the stairs, so extended all the circuits 2 metres and added a new DB. why question everything? are you bored

:banghead:

 

[onions1066]

Really really bored sorry

 

[MDJ]

playing with new camera View attachment 16474

Looks like a few circuits on the left have been doubled up there unless they are rings, but they look like 1mm2 to me even though there are spare ways, a poor show haha

 

[jonni770]

I wasnt aware that the cablw had to be secured at all in the trunking.. but thanks for the info i apprreciate that.

Jonni

Not all pics uploaded

Must have taken u a while to drill that lot lol, not picking holes but if that's fire alarm should that not be p-clipped in the trunking as opposed to cable tied?

 

[Dan the spark]

I wasnt aware that the cablw had to be secured at all in the trunking.. but thanks for the info i apprreciate that.

Jonni

It's to give the fire alarma bit more integrity if there's a fire, you think, the PVC trunking will melt but the cable will stay in place, also stops the fire brigade strangling themselves when running around in a fire