The 60 minute consumer unit change...

[Dustydazzler]

So , in the spirit of the 60 min Eicr the latest challenge seems to be the 60 min board change

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

View: https://www.youtube.com/watch?v=puXl0OoenWA


to be be artisan did a very neat job in 2 hours , which imo would be the bare amount of time I would allow for a board change (not including testing)

 

[littlespark]

If you’re not looking for a pretty job, or any testing.... I reckon I could change a board in 30 minutes.

that’s perfect situation.... suppliers isolator, not changing the tails, all cables in the board at a good length.....

 

[ipf]

So what.... about 3/4 of an hour for this.......admittedly, a bit skew-wiff.

 

[Dustydazzler]

If you’re not looking for a pretty job, or any testing.... I reckon I could change a board in 30 minutes.

that’s perfect situation.... suppliers isolator, not changing the tails, all cables in the board at a good length.....

impact driver to do all the terminations would shave 5 minutes off that time...