Vphase vx1 voltage optimizer do i test this how??????????????

[brian 2012]

When installing this device what test cert have i got to put with it???????????????????????????????????????????????? ??????????????????
Appreciate any advice

no circuits have been moved
50 amp mcb used for vx1
please help help help
thank you

 

[brian 2012]

And do i have to test the circuits this device is supplying?????????????

 

[Englishsparks]

electrical installation mate

 

[brian 2012]

Is that an electrical installation certificate needed
??????????????????????????????????????????????
After installing it

 

[Strima]

EIC with the relevant schedules. Although you haven't changed any circuits the supply has had a change in configuration. Just annotate device installed and no alterations to existing circuits, same as a CU change.

Just my humble opinion.

 

[brian 2012]

thanks for response
do i only test the circuits used by the VX1 OR ALL CIRCUITS??????????

 

[Plonker 3]

Why not ring you scheme up and see what they advise?

 

[Allan White]

When installing this device what test cert have i got to put with it???????????????????????????????????????????????? ??????????????????
Appreciate any advice

no circuits have been moved
50 amp mcb used for vx1
please help help help
thank you

They are part of the group I work for (in the office next door in fact...) - did you get an answer to this or would you like me to ask on Monday? BTW I can possibly get you a direct telephone number to the tech bods rather than the 0845 if it's helpful...

 

[Des 56]

It would be prudent if you had a disclaimer,one that they had to sign for you to be excluded from any accusation of complicity regarding the installation of junk

 

[brian 2012]

if you could try and get an answerfor me,as i have rang and spoke to them myself!!!!!!!!! not much luck tho with my question....... INSTALLING THE VX1 IT INVOLVES ADDING A 50 AMP M.C.B TO NON RCD SIDE TO SUPPLY VX1,CHANGING RCCB ON STARLOAD CRABTREE BOARD TO ACCOMADTE THE VX1 TO SUPPLY THE CIRCUITS IN THE PROPERTY.......SO SHOULD THE CIRCUITS SUPPLIED BY THE VX1 AFTER THIS INSTALLATION OF THE VX1 AND NEW RCCB BE ALL TESTED?????????? NO MCB's/CIRCUITS ON THE RCCB SIDE HAVE BEEN MOVED OR TOUCHED. ONLY A NEW RCCB ADDED THAT SUPPLY THESE CIRCUITS.
AT THE MINUTE I TEST THE NEW RCCB ONLY,AND THE VX1, ALSO I STATE ON MY E.I.C CERT THIS TO COVER MYSELF AS FOLLOWS (ONLY RCCB HAS BEEN TESTED ONLY VX1 HAS BEEN TESTED, NO CIRCUITS SUPPLIED BY THE VX1 HAVE BEEN TESTED) I THINK THAT ALL THE CIRCUITS SUPPLIED BY THE NEW RCCB AND THE VX1 SHOULD BE TESTED AFTER THE INSTALLATION IN MY OPPINION, BUT I COULD BE WRONG? MMMmmmm THIS IS A GREY AREA!!! ANY ADVICE IS WELCOMED CHEERS FOR THE RESPONSE LOOK FORWARD TO YOUR NEXT RESPONSE
Regards Brian