Who can install a PME system?

[DurhamSparky]

Think you can convert tt to a pnb, i am still at college and asked a tutor this question last wk.

stick with college matey! the truth is out there!! just dont ask tutors as half them wrong and out of touch with real life! (sounds like politicians!)

 

[SirKit Breaker]

DIY TT to TNCS conversions.............you will get a very big bang......................WHEN THE CELL DOOR CLOSES BEHIND YOU.

 

[caterhamboy]

stick with college matey! the truth is out there!! just dont ask tutors as half them wrong and out of touch with real life! (sounds like politicians!)

So you know it all Durham? I have heard about tt being converted to pme so asked a tutor who said it could be done to a pnb.

 

[telectrix]

TT can be converted to PME, but ONLY by DNO as 1.the earthing is incorporated in the supply.2. Only DNO can fit MET as it's tapped off the cut-out which is their property and responsibility

 

[DurhamSparky]

So you know it all Durham? I have heard about tt being converted to pme so asked a tutor who said it could be done to a pnb.

I "NEVER" said it "CAN NOT be DONE"

the Question i belive was

"Who can install a PME system?" not can you convert a TT to PME (TN-C-S) because your rod is Goosed!

and as rightly suggested by other posts it can only be done if AVAILABLE by the DNO (not just Joe Electrician)

 

[Spudnik]

100 ohms is only their reccommendation, it's not a requirement, they haven't rewritten the BRB.

Well, thats not strictly true.

One of the "people" high in the NIC is on the B.O.D's of the IEE.