-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss wire size for a gas furnace in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 1,670
All gas furnaces that I have worked on used a 20 amp single pole breaker using # 12 wire with ground.
Reply to wire size for a gas furnace in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
First time DIY post here….
My wife and I bought an old, run down 70’s lake trailer and ran into an AC wiring issue.
Our thermostat is wired...
Just under 2 years ago my central HVAC died. I wanted to go with a heat pump because the only appliance in the whole house that used natural gas...
Hello everyone. Budding DIY enthusiast fascinated with how things work - and, to a lesser degree, fixing things that are not working. I suppose my...
I have an new set of circs here...
Landlord in Cyprus
EICR needed in empty flat.
No credit on meter. Need power for Ze (TNCS) and RCD test at...
I was asked to see why a set of sockets weren’t working in the house (which appear to be a ring circuit based on breakers)
There was no power on...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Ali-express DY4100 Digital Earth TesterA digital earth is between electronic devices and the earth. You can test them with a Digital...- Latest: mainline
-
The big difference in the electric terminology and installation regulations and practice in each country!I know a few people who bought metric only tapes and generally they regretted doing so...- Latest: nicebutdim
-
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.