3 phase USA 3/60/220 to UK 3 phase is it doable thanks

[christake]

Hi 3 phase USA 3/60/220 to UK 3phase is it doable thanks oh and how?

 

[Darkwood]

On paper our low voltage 3phase system is 400v 50hz although it will more often measure about 415v.

 

[James]

You want to run a 220v device on 400v?

a transformer may be suitable but motor will run slightly slower due to the reduced frequency.

what is the device to be powered?

 

[Cookie]

I'd imagine the frequency would have a notable difference, if not one that is rather noticeable...

 

[christake]

You want to run a 220v device on 400v?

a transformer may be suitable but motor will run slightly slower due to the reduced frequency.

what is the device to be powered?

 

[christake]

Hi I am looking to buy a used. Process machine from USA the power spec I have been given is 3/60/220v which I believe is some USA spec. I have 3 phase UK 3 phase 400v ÷3

 

[brianmoooore]

Motor - generator?

 

[christake]

Machine using motors and air. Used to make sachets thanks

 

[Lucien Nunes]

A transformer can be used to correct the voltage, but the difference in frequency might be a problem. All AC motors that don't have variable-speed drives will run too slowly and might not work correctly. You would need to seek advice from the manufacturers as to whether it is capable of operating at 50Hz. If not, a frequency converter will be needed which is significantly more complex and expensive than a transformer, or some motors might need changing, or whatever. One would need very specific information about them to decide which methods would be best.

 

[christake]

A transformer can be used to correct the voltage, but the difference in frequency might be a problem. All AC motors that don't have variable-speed drives will run too slowly and might not work correctly. You would need to seek advice from the manufacturers as to whether it is capable of operating at 50Hz. If not, a frequency converter will be needed which is significantly more complex and expensive than a transformer, or some motors might need changing, or whatever. One would need very specific information about them to decide which methods would be best.