Search the forum,

Discuss Bathroom zones and ip ratings in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Any alterations and or additions to electrical installations in a special location (Bathroom) is notifiable to the council by law Terry so unless you’re with a scam/scheme I’d leave it mate
 
As post 2, I mean come on OP really?
 
Usually when you buy fittings for bathrooms,they have information on their packaging,telling you about the zones.
Real good information,not like some of our not very informative fellow electricians,get a life men.
See you at the pub ha ha .
 
Zone zero is the shower tray or in the bath.
Zone 1 is above the shower or bath up to a height of 2.5m.
Zone 2 is the space from the edge of the shower tray or bath to 600mm and again is 2.5m high.
The IP rating for electrical fittings outside of the zones is IPx4. In some circumstances IPx5 is required.
 

Reply to Bathroom zones and ip ratings in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top