Discuss CK Automatic or Irwin Vise Grip Wire Strippers? in the Electrical Tools and Products area at ElectriciansForums.net
I might have to nab that.and the Klein ones are currently on offer at CEF, for £22.50 plus vat which is an ok deal, methinks...instore purchase only.
The Irwin ones can't fit 1.25mm² flex in them. I had to grind a little bit off the jaws to be able to cram it in there.
Klein tools automatic wire strippers are a LOT better than the CK version. I've never been convinced before, but saw a guy demo them and they are phenomenal. Must pick up some at some point, I think you can only get them at CEF.
https://www.amazon.co.uk/CK-Electri...1782032&sr=8-1&keywords=ck+electricians+knifeI would like something that is generally capable of stripping 1mm - 2.5mm.
C.K VDE CombiCutter 3 160mm - https://www.NoLinkingToThis/p/c-k-vde-combicutter-3-160mm/31773I would like something that is generally capable of stripping 1mm - 2.5mm.
C.K VDE CombiCutter 3 160mm - https://www.NoLinkingToThis/p/c-k-vde-combicutter-3-160mm/31773
this will do it
The CK knife willWill they do the out sheathing too?
I like the look the of the automatic ones because you can put a bit of cable in and strip it down to the inner cores.
Do it the proper way:with a decent folding knife or an Electricians knifeYeah the combi cutter wont do the sheath, you'd have to pull the earth back and then cut the split sheath out. Not very neat, but that's how most people do it.
Yeah the combi cutter wont do the sheath, you'd have to pull the earth back and then cut the split sheath out. Not very neat, but that's how most people do it.
All very nice if all you want to do is strip 2inches of outer sheath, how about stripping longer cables, as in a CU install? not very practical really are they, a waste of hard earned, and I'm a tool tart, wouldn't insult my tool bag with a pair of those,The videos show you it cutting the outer sheath from the cable.
Complete waste of money imo.As far as I am aware, all these automatic wire strippers are the same.
Bought a SnapOn pair in 2003/4, never use them.
All very nice if all you want to do is strip 2inches of outer sheath, how about stripping longer cables, as in a CU install? not very practical really are they, a waste of hard earned, and I'm a tool tart, wouldn't insult my tool bag with a pair of those,
perfect tool for stripping PVC/PVC you just need a bit of practice, don't use a Stanley type far to sharpTrue.
But I wouldn't have any fingers left I used a knife like the one you showed me.
American cable is different from the UK,This man is using a Klein knife.
These are fine for flat cable, not so good for round.
Also quite delicate, need to be kept in a case or box.
Prefer the Jokari type strippers.
That would be 15 and a half quid wastedCK is going for £15.45 at Toolstation.
C.K Automatic Wire Stripper - Toolstation - https://www.toolstation.com/shop/p42984
Nope 20 quid wasted so far that's 35 notes wasted on useless tools
how about stripping longer cables
3 inches apart? come on mate get real.You can just do it multiple times up the cable, say 3 inches apart, then pull the bits of sheath off individually.
Reply to CK Automatic or Irwin Vise Grip Wire Strippers? in the Electrical Tools and Products area at ElectriciansForums.net
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.