DIY - help! - RCBO consumer unit

[verve01]

Hello,

Which amendment of the 18th BS7671 required RCDs for protecting lighting circuits (domestic)? I was told it’s amendment 2. Is that correct? Or is it amendment 1?

Thanks

 

[verve01]

Jesus what a mess. You need to get a competent electrician involved, completely reinstall/replace and get the correct Certification.

Thanks, but from a fundamental legal position, would it have been possible to provide a final completion certificate and ‘handover’ with this? Would it be builds control notifiable (if not registered with any orgs)? He’s saying that I’ve lost the paperwork - but I was never given it and this is what I’ve been left with!

 

[westward10]

From your other thread has this individual rewired your house.

 

[verve01]

From you other thread has this individual rewired your house.

Yes, I’m trying to address each of these issues to him as separate items. There are more! But I’ve kept it to those that are harder for me to understand whether it’s compliant and so I can take a more legal position, as well as the obvious poor worksmanship.

 

[westward10]

I suggest you may have serious problems if that is an indication as to the level of their competence.

 

[davesparks]

I'd say the format of that consumer unit hasn't been compliant for a good decade.

 

[Markyd]

Needs ripping out and a new board with SPD and RCBO's......and by the look of that you need your house testing...and HE needs his head testing

 

[DefyG]

I'd say the format of that consumer unit hasn't been compliant for a good decade.

We know that but Joe public can still go out and buy them!!

 

[nicebutdim]

We know that but Joe public can still go out and buy them!!

The majority of high integrity boards are supplied with dual RCDs. It would take some effort to find a one with a single bank of RCD protected circuits, unless a local wholesaler happened to be blowing them out at clearance prices....

 

[Mike Johnson]

He obviously worked very hard to get that amount of bare CPC in the trunking under the CU.

I wonder what's on the other end of the two bare phase cables above the RCD? love the choc blocks.

 

[Petej999]

I suggest you may have serious problems if that is an indication as to the level of their competence.

Agree