- Reaction score
- 176
Take it down to 1.2 bar ish and try linking L to R.
If there's no joy, let me know and I will think again.
If there's no joy, let me know and I will think again.
Discuss Flexicom 30cx - H/W but no C/H in the Central Heating Systems area at ElectriciansForums.net
I don't know. When I joined here It just accepted my user name from over there. @Corbs will probably know tbh.Hi
I took it down to 1.2ish yes. I'm going back tonight (clothed up to the max layers and all!!) to try the link out method.
So I'm not jumping between forums (sorry phone being a pain in the **** and closing tabs), it's worth stating as per other chaps advice, if I hold MODE for 2 secs approx or less, nothing happens.
Don't quite get the hold then jab button method but I'll give it a shot.
I still cannot understand why the heating text says OFF. The rad symbol flashes for a few secs then reverts to water tap symbol.
Incidentally, is there a way to change your username on the other forum? I deffo put an alias in and it looks to me (please kindly confirm) my full friggin' name is on that thread.
Got me paranoid now ha ha.
Are there no fault codes?
Have you tried linking L-R since you took the pressure down?
You could also try removing the 240V on R and linking out the 24v-0v on ebus side as 123 (I think) said earlier.
What does the display say? I know you said no fault codes but there should be a status code or something on it.
Start again with the reset button. Middle beneath screen.
Reply to Flexicom 30cx - H/W but no C/H in the Central Heating Systems area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.