Search the forum,

Discuss LED PIR flood with override in the UK Electrical Forum area at ElectriciansForums.net

I've only ever seen LED floods pre flexed with 3 core Lee, sometimes 2 core for Class 2 versions. It's an annoyance when they don't give you a proper override wiring option, I'll sometimes use a seperate PIR and you can also run more than one light from it or interlink with more PIRs if required.
 
I have seen several led lights with built in pir that do just what you want.
often they have a 3 core flex pre made into the enclosure but if you look inside there is a 4 way terminal block with L N E + sw L inside so you can link them together.
I have not got the makes and models to hand but it is common and you often don't know its there without reading the instructions.

P.s. I know we don't read them much but there is often something usefull in there.
 
Well why don't they fit the correct flex in the first place where that's been designed in, half baked manufacturing !

I half agree,
many diy peeps will be confused about the 4th wire and either just chop it off or leave it floating
and for 90% of installs its not required.

for most of my jobs, I have to replace the flex as it is too short anyway.
who wants a junction box within a foot (300mm to the young ones) of the light when most of the time within 6ft there is somewhere to wire it into.
 

Reply to LED PIR flood with override in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I am trying to understand how a relay system works and have designed a circuit and a ladder diagram all as attached for an 8 PIN relay, a current...
Replies
14
Views
627
Hi there, I have an outside light that is turned on with a switch from inside and would like to change it to a PIR version incorporating an...
Replies
8
Views
1K
I want to buy two of the above for my property. I am on a budget. The property can get battered by driving rain, finding an outdoor LED flood...
Replies
13
Views
1K
Hi all, Just a quick one, I want to use an ip rated light switch with a neon indicator to manually ovveride a PIR detector controlling an e27 LED...
Replies
1
Views
1K
I've a light fitting that's controlled from a Whitecroft absence detector PIR and a wall switch. The way it works, is the Retractive wall switch...
Replies
1
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock