Currently reading:
Socket Heights in New Extensions

Discuss Socket Heights in New Extensions in the Australia area at ElectriciansForums.net

C

chloebear

Hi All,
Do the heights of Sockets & Light Switches in a New Extension to an older property (one room) have to abide by the new regs for heights or can they be at the same height as the existing sockets etc?
 
joe i think you've contradicted yourself here???

righty, can someone ring up one of your schemes to find out the correct answer,

this is where i'm at as quoted from Part M building regulations page 12/87 http://www.planningportal.gov.uk/uploads/br/BR_PDF_ADM_2004.pdf

it says,

Where the requirements apply

0.1 the requiremtns apply if:

a. a non-domestic building or a dwelling is newly erected;

b. an existing NON-domestic building is extended, or undergoes a material alteration; or

c. an existing building or part of an existing building undergoes a material change of use to a hotel or boarding house, institution, public buiding or shop

...............the regulations then continue onto extendsions etc, but that applys only to newly erected buildings.

check it out for yourself, with this information you can put the sockets at what ever height you want, as long as it was built before ( i dunno 2003?? is it?? ) whether its had an extension on it or not, now if it was a non-domestic dwelling getting extended on an old building, then yeah by the looks it'll need part M taken into account?

that Help any one, or am I just rabbling on 'n' on

Regards Luke


I'm basically saying that you can put the sockets at what ever height you want, in this new extension as long as its not a new dweling
 
hi joe when you quoted on-site guide
there is the electricians guide to the building regulations and there is the
on-site guide bs 7671;2008
iee wiring regulations 17th edition
the guidance given in approved document M applies to all new dwellings
 
Thanks all for the input - quite a lively debate in some cases. After all the input I decided to grab the bull by the horns and get out Part M of the building regs. In here it states on page 6 (Guidance) - Where the Requirements Apply - Section 0.3 - "Extensions to Dwellings are excluded from Part M" from that I take it that the new heights etc for sockets for extensions to dwellings can remain at the same height as the rest of the house.:rolleyes:
 

Reply to Socket Heights in New Extensions in the Australia area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top