shower

  1. Iain Stewart

    UK Inspection Report, Electric Shower, Merlin Gerin and Schneider MCBs

    Hello, We live in an old stone built ground floor flat, built in the 1880s. Obviously the consumer unit and cabling has been updated a number of times over the years by previous owners. One being the Local Authority who owned the property back in the 1960s -70s. We have lived here for 25 years...
  2. P

    Safety Concerns Over a Shower Upgrade??

    Hi Folks, Not been on here for a while, but something came up the other day that has me concerned to the point I thought I would ask here. A good friend asked me if I would connect up a new electric shower for him. This is an older gent, a farmer, and as much I like to look out for him and his...
  3. B

    Mira shower low flow

    Hi all problem with a Mira shower sport. When the customer uses the shower it starts off fine with flow decent and heat good but cuts off mins later with the low flow light coming on, wait 5/10mins and the shower will come on itself. I’ve checked the power connections all well and good and...
  4. S

    Chasing Cables for Shower Advice

    Hi, we are having a shower fitted - the electrician has run the cable vertically over the top of the noggins, meaning when we make the wall good the filler will encompass the 10mm cable he has pinned to them. I'm certain this is not correct, so I'm tempted to retrospectively cut the cabling into...
  5. S

    Chasing Vertical Cables for Shower Advice

    Hi, we are having a shower fitted - the electrician has run the cable vertically over the top of the noggins, meaning when we make the wall good the filler will encompass the 10mm cable he has pinned to them. I'm certain this is not correct, so I'm tempted to retrospectively cut the cabling into...
  6. F

    What kind of Electric Shower install is possible with my existing consumer unit?

    Hi I am moving into a ground floor flat and would like to have a new electric shower installed above an existing bath tub, unfortunately due to low pressure from the hot water tank a plumber has advised a mixer shower is not an option and neither is a pump. I am rather new to all this sort of...
  7. L

    shower not working

    Shower not working after new consumer unit fitted. It's not the shower or isolator switch that is at fault. Source URL: DIY Electrical Forum - https://www.electriciansforums.net/forums/diy-electrical-forum.64/
  8. Dan

    Shower Power Booster - Had a drop in water pressure?

    https://www.plumbersforums.net/threads/shower-power-booster-giveaway-competition-ends-31st-december.111068/ There's a deal on these, but even when there isn't a deal going they can be a godsend. These little gizmos fire up the pressure of the water feeding your shower (or other taps)...
  9. I

    Electrical shower pipe connection

    Hi All, I've got a job coming up to replace electric shower. The old one has this pipe connection to water inlet upwards but the new shower has got be connected from left or right positions. Had any encountered similar scenarios before and how would you connect new shower to existing pipes. I...
  10. T

    (Wrong category I know) Need advice on plumbing my own house?

    Firstly I know I’ve posted this in the wrong category, I couldn’t find the right one for some reason. I’m a industrial/domestic electrician, I’m doing a rear extension and loft conversion on my bungalow myself. I’m of course doing the electrics myself and I’m looking at plumbing the CH and...
  11. I

    Power Shower Installation

    Hey, What's the standard way a power shower is installed, I've done electric showers but not power shower before. Also is a fan mandatory in a bathroom
  12. L

    DIY 10.8KW shower installation - Wiring up from CU to Shower - One Switch

    Hi all, I'm looking to install a Mira Sports Max 10.8kw shower and wondered what size cable and fuse I need to use? I live in a top floor flat with loft access so I plan to run the cable straight up into the lost from the fuse board and then back down into the bathroom ( approximately 6 metres...
  13. C

    Tripping Shower

    I have a 9.5kw shower running from a 40 amp rcb. About 10 minutes after turning the shower off the rcb trips. This has only just started, the shower has been in since we moved in. There is no pull cord switch, or rocker switch for the shower. Any thoughts why this might be happening?
  14. J

    Supply loft light from unused shower cable

    I was asked a question today if it would be possible to use an existing cable that was previously installed to supply a shower which has been taken out (6mm T+E) to feed a light in the loft. Initially I said no it wasn’t good practice to do this, but now I’m thinking as-long as the MCB is...
  15. A

    UK Electric shower disconnetion

    Good morning everyone! Got a question for you, I'm currently remodelling my bathroom and the electric shower is being removed and a thermostatic shower type mixer tap is replacing it. My question is can i just disconnect the cable going from the shower to the load side of the pull chord isolator...
  16. M

    Shower Wiring in Granny Annexe

    Hi All, I am Faraz, I'm a Mechanical Project Engineer by trade. This is my first post on these forums. I am looking for some insight into a problem I'm having. I currently have a 6mm Cable running from the main RCD to a 9.8kW shower in a Granny Annexe. the wire currently runs about 25m long...
  17. buzzlightyear

    nicely fried - 9.5kw shower, not certificates for the job

    just got back from a customers ,hoping it a nice job and it was ,customers saying I cant push the isolator to the off position . off comes the isolator wow that isolators fried ,so 6mm cable in and terminals tight has a ducks a88,now for the shower 9.5 kw . now what about the rcd for it ,nice...
  18. Baker1988

    UK Mira Advance Flex Shower Unit

    Selling a brand new Mira Advance Flex 8.7KW Shower Unit. It’s all boxed and never used. £100 pick up from Hull as don’t want to wait 30 days for it to clear in PayPal.
  19. B

    Electric shower using trunking

    Hi, not done many showers 9.5kw shower, clipped direct, 10mm cable, 40amp MCB no issues the thing I wanted to ask was, there was existing feed too small so new cable all newish tiles so going to run some 25x16mm trunking now do many shower have any knockouts on top? Or will I have to make my own...
  20. NackJich

    Shower issue

    Hi first post new member.. Hello everyone.. Diy question but not intending to diy.. A local firm fitted a new bathroom and installed a shower. They replaced the wire to the fuse box and added the unit to the old box as shown in the photo. There was a smell when I went in to the cupboard, and...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock