tripping

Recent contents Top users
  1. Sonia Norman

    Rcbo tripping

    I came across something new today. When I removed the main earth to do ze the rcbo tripped. Put the earth back in and it's fine. Can anyone explain what is going on?
  2. M

    Multiple GFCI Outlets Tripping at the same time on different circuits

    Dealing with a noodle scratcher. Trying to figure out what has caused multiple GFCI outlets on separate circuits to trip at the same time. Over the last two Wednesdays in the morning something has happened which caused multiple GFCI outlets throughout the house to trip at the same time...
  3. D

    UK RCD Tripping

    Evening, came across a fault today on a new board that’s been fitted by a previous electrician. Split load dual RCD 6 way Hager board, when a fused spur is switched on or when the boiler starts up the RCD trips but the circuit is on the other RCD. Have checked the all wiring at the DB and all is...
  4. I

    TT system, earth to neutral not tripping RCD

    TT system, Zs on socket circuit is 77.2 down a good bit after I added a second earth rod. When I short neutral to earth RCD doesn't trip. Can anyone help me out and explain please.
  5. S

    Sockets tripping after board upgrade - should have been rewired

    After updating a consumer unit, from an old rewireable fuse board, one of the socket circuits is tripping when under load. The property should have been rewired as the installation is so dated but the project manager and client didn't want to rewire it. The supply to the flat is approximately...
  6. G

    Fuse tripping when using mitre saw

    From time to time the fuse is tripped when I use my mitre saw the first time, in house sockets seem tobe ok but not for those in the garage. Its the first one (B16), do I just need to call out an professional to replace it for a B32 and if so how much would that cost please? Thanks
  7. L

    RCD tripping overnight with nothing connected

    Good evening. Had a new consumer unit fitted a week ago, Paid over £500+vat for a proteus 5+5 board to replace an old non-rcd board. Ever since it was fitted the right hand RCD has tripped in the middle of the night, between around 11pm and 7am, every night. This powers a socket circuit, an...
  8. D

    RCD nuisance tripping headscratcher.

    I have been out to a nuisance tripping RCD this morning, there are 3 socket circuits, 1 boiler circuit, and 1 oven circuit protected by the RCD. I started by checking the IR between L-E and N-E, the reading was between 2 and 3 M ohms on every circuit and leg. I then disconnected the CPCs for...
  9. B

    UK Cooker dedicated RCD tripping under zero load

    Hi, I am new to the forum, and a DIYer. For a couple of weeks our cooker circuit has been tripping the RCD in the Breaker dedicated to this circuit at the CU. The cooker is a Falcon 90cm induction hob unit, it is installed with a fused dipole isolation switch. The tripping has always happened...
  10. G

    New Home Construction with Tripping Arc Fault Breakers

    Greetings All: I am new to this forum and hope I am in the correct sub-group. We are nearly completed with our new home construction...just a couple weeks from moving in. The 200Amp service panel has 4, sometimes 5 arc fault breakers that repeatedly trip at random times. There are NO...
    • Geewiz
    • Thread
    • arc fault breakers construction fault home new tripping
    • Replies: 12
    • Forum: USA
  11. G

    RCD Tripping Nuisance / Faults

    Q1: I am not far off getting professional in but which professionals and how to find a good one? I have researched and investigated a bit myself and concluded that: My clamp meter (MP780050 £40ish from Farnell, so cheap not calibrated, no ability to detect dc etc etc) was really helpful in...
  12. O

    Led downlights tripping RCD

    Hi all, Just powered up 6 new led downlights and RCD is tripping. All wiring disconnected and checked, no faults? Tried light on a separate supply and still trips RCD...very strange. Is the led (integrated but 240v) causing a surge and/ or a lag?
  13. H

    RCD tripping.

    So I’ve been working at a cafe and I have an RCD as main switch by the incoming supply which is up the drive and it comes into the cafe fuseboard which is a split load with two 63A RCDs. They’ve been having the RCD trip constantly at the end of the drive and not the ones INSIDE the cafe fuse...
  14. L

    Rcd tripping

    Hi all I recently built a new garage. Wired it myself put up the fuse board but now when I go to plug in any appliance the rcd trips out. Theres nothing else plugged into the sockets. I wonder did I make a mistake wiring the fuse board?11
  15. C

    Electric UFH tripping RCD

    Hi all, i'm a home owner just looking for some advice. Over Christmas the RCD on a split panel fuse box kept tripping. We narrowed this down to the master bathroom underfloor heating. The buildout for the loft including the master bathroom is about two years old, the UFH is under tiles. I think...
  16. M

    RCDs tripping during heavy rains

    Hi all - hopefully you can forgive my lack of knowledge on electrics, I have a basic grasp but am no expert. The issue I've had and am looking for an initial steer on is that during some extremely heavy rains recently, after a long spell the RCDs will trip. While still raining, they will not...
  17. J

    electrical my bathroom lghts keep randomly tripping

    my bathroom lights keep tripping
  18. C

    Lighting MCB intermittently tripping

    Lighting MCB started tripping over Christmas. Sometimes you can reset right away, and sometimes maybe the next day, which makes me think dampness due to snow etc. It can trip in the mddle of the the night , when no lights are on It always takes out RCD, but isolating the lighting circuit means...
  19. jimmyfield3877

    RCD tripping

    Hi All, I'm having an issue with an RCD tripping. I've run 6mm Hi Tuff from house to garage CU, run is no more than 10 metres. This has a 40A RCD with a 32 and 6A breaker in. Zs, R1, R2, insulation resistance readings etc are all good for the cable. The problem is as soon as I turn the Garage...
  20. P

    Kitchen sockets keep tripping.

    Hi all, hope everyone has had a nice Christmas. At some point this morning the kitchen sockets tripped and its had me up the wall, literally. It has happened in the past but I just flip the breaker back up and it's been fine. Not today. Flip it up, few seconds later it trips the downstairs...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock