16mm or 25mm tails plus when to install switch fuse?

[Midwest]

2) In my limited experience on this subject, my DNO expects the customer to supply the meter box and fit it as well. And although they don't own it they have certain requirements, like only our equipment can go in there. But when I spoke to them about fitting switch fuse in there, in similar circumstance, they were okay with it. Best to give them a ring/email and agree what they deem acceptable, before their guys turn up on site.

 

[davesparks]

Which dno is it? You normally get a guide telling you exactly what they expect you to do before they arrive.

The basic idea is that you fit the meter box, the left hand side of the back board is reserved for dno equipment and the right hand side is for the consumers equipment. You got whatever you need and leave your tails ready for them to connect.

 

[HappyHippyDad]

Which dno is it? You normally get a guide telling you exactly what they expect you to do before they arrive.

The basic idea is that you fit the meter box, the left hand side of the back board is reserved for dno equipment and the right hand side is for the consumers equipment. You got whatever you need and leave your tails ready for them to connect.

Western Power.
The client hasn't received the pack yet.