Search the forum,

Discuss £40 hamper to the first person who finds me this ladder! in the Electrical Tools and Products area at ElectriciansForums.net

HappyHippyDad

-
Esteemed
Arms
Reaction score
5,630
So....

I have put some feelers out for a particular ladder I am looking for but am not getting any where. So it's time for a Saturday Special Deal.

I will send a £40 hamper (wine/chocolates etc) to the first person who finds me the following ladder, meeting ALL the requirements:

1. 6 tread step ladder
2. Fibreglass.
3. Little platform on top (for screwdrivers, hammer etc).
4. Twin step (i.e you can go up both sides, both sides being the same)
5. In the UK and in stock.
6. Under £200
7. Probably better add that if someone sees this in 10 years and I still haven't got one, I may choose to decline.
8. This doesn't include @telectrix saying he'll make one for £200 :D
9. I haven't found found one in the meantime.

I do reserve the right to say 'that's not quite what I was looking for' even if it appears to meet all of the above. For example this one Welcome to Screwfix | Screwfix Website - https://www.NoLinkingToThis/jsp/trolley/trolleyPage.jsp doesn't quite meet the requirement as both sides are not the same, whereas this one does View: https://www.amazon.com/Werner-Ladder-T6206-Stepladders-6/dp/B000BZX0RY/ref=sr_1_3?crid=1QFSKEI5XIK2Y&dchild=1&keywords=werner+twin+step+ladder&qid=1601124595&sprefix=werner+twin+%2Caps%2C1162&sr=8-3


Happy hunting :)
 
I think you might have to compromise... why not order one in from USA. You'll have to pay a bit more and wait a few weeks, but every other condition is met.

Does that qualify me for half a hamper ?? Just the wine ??
 
What about something like this - scroll down for 6 tread option.
[automerge]1601129389[/automerge]
These look like the dogs danglies, but options are 5 or 7 treads and only available in Australia.

Sorry to continually disappoint :p
 
Last edited:
I think you might have to compromise... why not order one in from USA. You'll have to pay a bit more and wait a few weeks, but every other condition is met.

Does that qualify me for half a hamper ?? Just the wine ??
I think you might be right Zerax. No wine for you though :D
What about something like this - scroll down for 6 tread option.
[automerge]1601129389[/automerge]
These look like the dogs danglies, but options are 5 or 7 treads and only available in Australia.

Sorry to continually disappoint :p
Has to be 6 tread. Lovely looking though.

The dewalt one looks like its double sided.
I have seen these ones. Over £200 though so no wine for you, sorry. Although if they are in stock I might just go for them as a last option. I think they've hiked up the price as they're only a £100 ladder really.
Keep the hamper and spend the extra 40 on these
[automerge]1601129987[/automerge]
Chase Double Sided Step Ladder - https://www.laddersalesdirect.co.uk/chase-double-sided-step-ladder/ not fibreglass
Close, but like you've said, not fibreglass.
How about one of these:
View: https://youtu.be/oViGvIGELIs


Available here:
See my first post. There is a link to these. They do look good but not quite it.

A lot of good efforts, but no hamper yet! :D
[automerge]1601136824[/automerge]
Keep the hamper and spend the extra 40 on these
[automerge]1601129987[/automerge]
Chase Double Sided Step Ladder - https://www.laddersalesdirect.co.uk/chase-double-sided-step-ladder/ not fibreglass
Ps.. The first link you sent are fibreglass, but the top bit sticking out makes it a bit too long for the van I think. Also, the steps on one side look smaller and I'm not sure they are designed for walking up? If they are, I wonder why they are smaller.
 
Last edited:
tempImageZEDULI.jpg
6 tread, 6 foot Werner ladders but in blue?
 

You will have to put the money for the hamper towards the ladder though
 
That's not a twin though is it Richy?
Ah. I now see on closer inspection. No it isn't even though we still climb up the wrong side sometimes.
I'd just ask one of the wholesalers to get one in for you - thats what I do with Werner ladders. I've had them from CEF, YESSS and Rexel.
 

You will have to put the money for the hamper towards the ladder though
Not quite what I'm looking for @Doomed . The little platform at the top needs to be one that is for hammers, screwdrivers etc. Also, the one in your link will be too long for the van.
See my first post as to the type i am looking for, i.e both sides the same. Oh yes, and it's over £200! :D

I'm a man of my word and I genuinely will send a hamper to whomever finds one meeting the criteria in the OP.
[automerge]1601207159[/automerge]

You can get them in Ireland
Now that one is close to what I'm looking for. Just doesn't have the nice tray on top with little holes for screwdrivers, hammer etc. Also, as you say, in Ireland.
 
Last edited:
You wouldn't think it would be so hard to find a twin fibreglass step ladder in the UK!

I'm genuinely thinking of just sticking a few wooden steps on to the other side of my existing ladder!
 
Not quite what I'm looking for @Doomed . The little platform at the top needs to be one that is for hammers, screwdrivers etc. Also, the one in your link will be too long for the van.
See my first post as to the type i am looking for, i.e both sides the same. Oh yes, and it's over £200! :D

I'm a man of my word and I genuinely will send a hamper to whomever finds one meeting the criteria in the OP.
[automerge]1601207159[/automerge]

Now that one is close to what I'm looking for. Just doesn't have the nice tray on top with little holes for screwdrivers, hammer etc. Also, as you say, in Ireland.
soon make a tray to clip on. bit of 2mm ally wth the appropriate holes drilled.
 
Why do you want it just out of interest?
Good question Chris, I should have explained a little.

Every now and then I have a think about what problems I have encountered on a job and if they are recurring problems. If so, I have a think if I can make this problem go away or at least make it a little easier.

Sometimes I'm in a small area with my ladder and it is a bit of a pain to fold it up, manoeuvre it around, reopen, climb back up the right side..... and then discover 5 minutes later I need to do the same again.

All these little things add up, so I try and fix them as i go along, making life that little bit easier. Less likely to make mistakes and also perhaps leave 5 minutes earlier supping a pint just that little bit sooner :) .
 
Does a standard hop up not work in most situations? I find I only use my ladders probably 20% of the time now.
Yes, the little hop up is great and I probably use it more than the ladder, say 60% of the time, but the 40% when I use the ladder could be better with some lovely twin steps. Not essential by any means, perhaps more of a treat but one I have decided (in my mildly autistic way) that I NEED!
 
https://www.NoLinkingToThis/p/dewalt-fibreglass-6-treads-swingback-stepladder-1-83m/1272j

Clocked it.
[automerge]1601233500[/automerge]

Crap it's not the double sided one I think - same model number though?
and it's out of stock.
 
6 tread with moulded tool tray

Also not in stock
[automerge]1601293817[/automerge]
DeWalt Fibreglass 6-Treads Swingback Stepladder 1.83m - https://nextprice.co.uk/storage-ladders/ladders/fibreglass-ladders/fibreglass-step-ladders/dewalt-fibreglass-6-treads-swingback-stepladder-183m

In stock (according to the website) in budget. EDIT but still not sure it's double sided. I give up now
 
Last edited:
I have been looking for such a ladder too, and I ended up buying one of those ladders I found in this article. Maybe you should have a look there too, I am sure that you will like something really good for you, good luck!
 
I think you might be right Zerax. No wine for you though :D

Has to be 6 tread. Lovely looking though.

I have seen these ones. Over £200 though so no wine for you, sorry. Although if they are in stock I might just go for them as a last option. I think they've hiked up the price as they're only a £100 ladder really.

Close, but like you've said, not fibreglass.

See my first post. There is a link to these. They do look good but not quite it.

A lot of good efforts, but no hamper yet! :D
[automerge]1601136824[/automerge]

Ps.. The first link you sent are fibreglass, but the top bit sticking out makes it a bit too long for the van I think. Also, the steps on one side look smaller and I'm not sure they are designed for walking up? If they are, I wonder why they are smaller.
Your apprentice has smaller feet?
 

Reply to £40 hamper to the first person who finds me this ladder! in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

I'm looking for a double sided (i.e you can walk up both sides) fibreglass 6 step stepladder. I have found this one Industrial Steps - Fibreglass...
Replies
8
Views
1K
  • Locked
  • Sticky
Beware a little long. I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Replies
55
Views
5K
Hi. I got a new oven the other day and it was working fine. Last night, I swapped out the 45A wall switch for a brushed brass type one. The neon...
Replies
7
Views
2K
I know how I was taught to test a RCD, 6 tests in all two no go, two under 300 mS and 2 under 40 mS with no load. But thinking about it not so...
Replies
7
Views
3K
first day done of my AM2 exam. Just wanted to let people know what I done and if I will loose any marks. So first of all risk assessment and safe...
Replies
31
Views
9K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock