500w PIR plugged into Ring Final circuit

[claret73]

it will look a bit diy running it through a plug, id do it the other way,

That's the point, they're fitting it themselves, as they haven't asked me to install it & no doubt once they see another price going in on top of what I'm doing already they'll mostly be putting a plug on it...

 

[Wiredspark]

it will look a bit diy running it through a plug, id do it the other way,

Totally agree, there is no reason not to chuck it into an FCU, that'll keep the skts free too. You could always use a 28wCFL sprial. I've fitted quite a few of these and they chuck out a much better light than the Hallo's and IMO enough illumination for more than 20yards of drive. Saves a whack on the pocket. I will mention a slight drawback with them. In the REALLY(considerably below zero) cold weather they can fail to kick in. But otherwise, they are fine.