Advice on redundant equipment

[Jako13!]

We have a redundant bit of kit fed from an old 3 phase supply. Everything in the panel is disconnected up to the end incoming of the isolator. The panel is locked is there any need to remove the fuses from the main supply and lock off?

 

[James]

What does your risk assessment say?

 

[littlespark]

Depends on the scrap value

 

[Timbo]

Depends on the scrap value

You're talking like @telectrix now!

 

[Wilko]

Hi - If the circuit is not in use and there isn’t a plan to put the circuit into service “when WigetX comes back from the repair shop” I would remove the fuses, attach a label, connect conductors to the CPC and update the records. When you’ve done the work someone will tell you WigetX is back and urgently required in service of course.