Armeg Wood Beaver

[Pete999]

Has anyone had any experience in using these wood bits, or what are your recommendations Armeg Stubby Wood Beaver Set 3Pcs | Four Flute Drill Bits & Sets | NoLinkingToThis

 

[Paul.M]

Put your drill on a lower speed setting and let the pointed screw pull the drill bit through.

 

[Delboybully]

I use them with my mains powered makita angle drill, drilling through joists is a breeze. They pull thenselves through. You dont need to push.

 

[topquark]

They are very good, no hesitation in recommending them.

 

[Johnuk]

good item we use them all the time

 

[thekingiam]

they are good, would like a angled drill though as sometimes cant get drill in to joists.

 

[spidersparks]

Yes makita angle drill on low speed eats through joists with these perfect get!

 

[davesparks]

Yes they are good, the nail proof version is even better as they do survive hitting the occasional buried nail.

 

[Pete999]

Thanks for all your replies

 

[Darkwood]

Because they have extra fluting as oppose to a spade bit you need a good drill as mentioned above that can be put into a low gear or a top end battery drill ... My 36v bosch sometimes struggles if the wood is anything but soft... can't knock the bit itself its just you need a decent drill if battery.