best tool to chop 150mm 4core swa

[Brightspark2]

Problem with using a grinder or similar is the amount of smoke and fumes it kicks out...

I'd recommend a battery bandsaw, buy the bare body that matches your drill set so you can use your batteries, bosch, hilti or what ever...

I'd post a link but my phones playing up...

 

[shanky887614]

Problem with using a grinder or similar is the amount of smoke and fumes it kicks out...

I'd recommend a battery bandsaw, buy the bare body that matches your drill set so you can use your batteries, bosch, hilti or what ever...

I'd post a link but my phones playing up...

if you use tct blades etc then very little.

if its that much of a problem bolt cutters would work

would be better off with these

ive seen them in city's

 

[bigdavs83]

Just a wee update for all. A reciprocating saw was purchased and a pack of 5 bosch blades for cutting metal. We managed to strip most of it out and get it cut into metre long tusks. Took around 45 mins to strip it out and cut it all. Definitely recommend the recip saw. Thanks to all the posters and the advice given. Am off to strip all the insulation now!!

 

[guest119]

Need a hand?

 

[bigdavs83]

Thanks boydy but eh... Next time maybe