Hi All
I have been asked to install a small BMS system in my local community centre for whom I do all their normal electrical work.
All the radiators are being fitted with 24 vdc actuators, each drawing 30mA when operating. There will be a maximum of 2 actuators on each cable run.
The BMS manufacturer has recommended using Firetec Standard multi core LSZH 1.5mm claiming that's what "the regulations" state.
Seems total overkill to me (notwithstanding difficult to work with) but I am not familiar with the cable regulations for this type of circuit.
Any advice or pointers gratefully received.
I have been asked to install a small BMS system in my local community centre for whom I do all their normal electrical work.
All the radiators are being fitted with 24 vdc actuators, each drawing 30mA when operating. There will be a maximum of 2 actuators on each cable run.
The BMS manufacturer has recommended using Firetec Standard multi core LSZH 1.5mm claiming that's what "the regulations" state.
Seems total overkill to me (notwithstanding difficult to work with) but I am not familiar with the cable regulations for this type of circuit.
Any advice or pointers gratefully received.