I have 2 new Hunter ceiling fan light combinations. We previously had Hampton Bay fan/light combos. We have dual switch 3-way wiring, and we could turn on the fan or lights separately from the top or bottom of the stairs. Now to turn the light on the fan’s switch needs to be on. The light switch will then turn the lights on and off but only if the fan switch is on.
Discuss CEILING FAN LIGHT COMBO LIGHT PROBLEM DYI in the Lighting Forum area at ElectriciansForums.net
- Reaction score
- 25,470
This is a duplicate thread the other is on the American forum.
Reply to CEILING FAN LIGHT COMBO LIGHT PROBLEM DYI in the Lighting Forum area at ElectriciansForums.net
Similar Threads
Hi, have an old bathroom fan. Which has two wires the black and red (line and neutral).
The fan has no isolator switch and was powered when the...
WIRING FOR WALL SMART SWITCH FOR CEILING FAN/LIGHT
Just bought a smart wall switch for a ceiling fan/light currently connected to a single switch...
- littletwinn
- DIY Electrical Advice
Hi
I'm looking for some advice for adding a time delay on my parent's shower room fan.
My parents had a section of their garage converted into a...
Looking for counsel / guidance to replace an original Dayton On/off with speed control switch. I’ve checked with a couple local electrical supply...
Hi,
I am installing a new bathroom fan. We had an electrician who ran 14/3 into a junction box. The black feeds a led light and the red was...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.