Clean Suggestions for Cutters 10-25mm

[DuaneMHunt1976]

Basically putting some 16mm Bonding in and wonder if there is any
EASY
CHEAP cutters that can handle it.

Tho bonding is 10-16mm ..i figured if it could do 25mm (tails) then it would be there if i need it for such a thing.

 

[Darkwood]

Look up cable croppers as appose to cutters, you only need a small pair.

 

[Leesparkykent]

As above CK Tools 210mm quality cable cutters, cable snips, accessories, T3963-160 UK

 

[NDG Elecs]

That's what I use Lee. Spot on they are, keep a good sharp edge. Half decent for dressing smaller cables such as 2.5mm if you're careful with them. They also slice through 25mm tails easily Duane. Not the cheapest but well worth the extra few quid.

 

[shanky887614]

knipex shears for me.

ive got the 165mm pair for upto 16mm and i use my 230mm long pair for the bigger stuff or micc

you can get them cheaper elsewhere.


(ive cut 25mm with these below)

but obviously using the bigger set is a lot easier (big set are rated for upto 70mm fine stranded)

 

[newtothis]

As above CK Tools 210mm quality cable cutters, cable snips, accessories, T3963-160 UK

Just ordered a pair of those, alas I've had to pay £18.99. :book:

 

[DuaneMHunt1976]

Think Lee link is £11.30 and £2.49 P&P = £13.79 with 20% VAT (£2.758) = £16.55 (rounded up because of Vat man)

 

[newtothis]

Thx Duane, that makes me feel better mate

 

[DuaneMHunt1976]

:cry_smile::17:

 

[telectrix]

had to buy a pair of them when i started losing my teeth.

 

[lecsleaford]

 

[newtothis]

Loving those CK cutters I was chumping through 6mm T&E today, enjoying that smug feeling you get from having the right tool for the job.
Should I be concerned there's no safety info printed on them ?

 

[shanky887614]

Loving those CK cutters I was chumping through 6mm T&E today, enjoying that smug feeling you get from having the right tool for the job.
Should I be concerned there's no safety info printed on them ?

you dont need shears for 6mm. you can cut 10/16mm with a decent pair of snips

 

[Leesparkykent]

Loving those CK cutters I was chumping through 6mm T&E today, enjoying that smug feeling you get from having the right tool for the job.
Should I be concerned there's no safety info printed on them ?

No, they aren't VDE.

 

[newtothis]

I have super-sexy £40 quid NWS side cutters, I find them awkward for anything over 2.5
I'm trying not to buy anything that isn't gs38 compliant.
Are you talking tin snips ?

 

[shanky887614]

I have super-sexy £40 quid NWS side cutters, I found them awkward for anything over 2.5
I'm trying not to buy anything that isn't gs38 compliant.
Are you talking tin snips ?

you got conned mate. nws snips are cheap usually half that

bahco and knipex are cheaper and better (me and another lad have got a pair of bahco and there really good)

 

[Barry White]

have a pair of these they work very well carnt vouch how long they will keep there edge as dont use cables this size a lot but for the price of a pint who cares

 

[shanky887614]

have a pair of these they work very well carnt vouch how long they will keep there edge as dont use cables this size a lot but for the price of a pint who cares

you can cut small swa with them as well

 

[davesparks]

you dont need shears for 6mm. you can cut 10/16mm with a decent pair of snips

It's a damned sight easier with shears though, it's not a competition to see who can knackered their hands up first you know!

 

[shanky887614]

It's a damned sight easier with shears though, it's not a competition to see who can knackered their hands up first you know!

im just saying with a sharp pair of snips its not to hard.


a small pair of shears is perfect when you get used to them, can do everything from 1mm flex to 16/25mm with them easily