Danfoss rotary actuator

[sydney101]

Hi all can you help please , have got a danfoss rotary actuator amb 162 plumbed into a standard s plan . It has two flexes on it . One flex has brown blue white , the other 3 whites labelled 1,2,3. Any help on where these go in the wiring set up
thanks

 

[guest119]

http://heating.danfoss.co.uk/PCMPDF/VILFD200_AMB162-182.pdf

 

[sydney101]

http://heating.danfoss.co.uk/PCMPDF/VILFD200_AMB162-182.pdf

Ok thanks for that , that seems to clear up the brown, blue and white cable , not to sure about the three white cores in the other flex , I would think there signal cables from a micro switch of a sort
mall help appreciated thanks

 

[guest119]

Looks like the white cores are the drive open, drive closed.

Boydy

 

[jase158]

take it back if you just bought it and get yourself a Honeywell one, if you are qualified then easy to do wiring, if not then get an electrician.

 

[sydney101]

It's plumbed in , not supplied by myself ,