D
Deleted member 9648
I currently have an intermittent issue with a disabled alarm system. The pullcord has a fault monitor connected across it in the form of a resistor and diode in series which I suspect is the culprit. The diode only reads continuity one way as expected but the resistance through it the correct way is around 500 ohms. As a contracting sparks my knowlege of electronic components is limited so can someone tell me whether this is correct or whether a low resistance should be expected? The diode is marked IN4007 with F018T underneath if that helps.
Thanks for any advise....WP
Thanks for any advise....WP