Discuss DO WE SLEEVE in the DB in the Lighting Forum area at ElectriciansForums.net

You can change a length of damaged/faulty cable like for like.
What if that length was to the CU, would it be considered a new circuit?
IMO? (wait for some opinions) then will reveal

Not a new circuit no. But obviously needs testing.

There, I've said it. Comments welcome :)
 
I’d appreciate your professional views on this question, as I’ve had 2 of the associated electrical bodies quizzed on this.!!!!

ON changing/up grading a DB/Fuse Board/ Consumer Unit..!!!!!!

There are both Blue/Brown & Black/Red.

ALL ‘pre insulation’ and ‘r results’ are good and within required tolerances.!

WHY WHY WHY should the older Black/Red cables within the DB, be SLEEVED with Brown and Blue..????????

If an individual shows only ‘Competency’, they should in NO way be removing the lid of the DB…!!!!

The ONLY ONLY person doing this should have qualification and should therefore KNOW the difference in the colour change etc.

IF you start sleeving the old cables.!!! Isn’t this ADDING possible flammable items within the DB, or adding to the thermal effect of that individual single as you’ve now introduced and added thermal sleeve.

IF a qualified Sparkie doesn’t know the difference between Brown/Blue and Black/Red then should he/she be working.???🤔

If, as I’ve been told, by one of the Electrical Bodies, that sleeving the OLD colours within the DB, should be performed.!!!!

WHY WHY do we have those stickers available to use on the outside of the DB informing that there are different colours within.???????

Am I going mad.????🙀🙀🙀
My god this is difficult to read.
 
They do not require sleeving providing they are correctly identified as to their purpose. The two coloured notice is no longer required.
If they are saying to do this within the DB do they advise the same at every accessory.
Are you not some sort of assessor you should be well aware of this.
Always nice to get a second opinion.

Regards
 

Reply to DO WE SLEEVE in the DB in the Lighting Forum area at ElectriciansForums.net

Similar Threads

Wouldn't normally note this as an observation on a report but feel I need to. The way the building has been wired is all circuits on L1 have been...
Replies
6
Views
1K
Hi, I'm looking to install a new bathroom extractor fan in my bathroom as I have a windowless bathroom and the current one I have installed in...
Replies
13
Views
695
I have a baffling problem with a newly-installed PIR floodlight and I'd like advice from the forum as to whether it's defective (and should be...
Replies
5
Views
579
I have pulled out an old evaporative system I purchased many years ago from storage to have a look at it and see if I can get it running. Was...
Replies
1
Views
227
Hi, I'm trying to rewire an old plug. I've rewired a few in my time, but all have been with the post-2006 wire colours. I have this old welder...
Replies
3
Views
867

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock